Unsolved
This post is more than 5 years old
1 Rookie
•
20 Posts
0
1185
June 14th, 2017 20:00
Scons
Regarding the Scon (ssh,8443)
- Unplug a single SC Controller's Management (eth0) port
- Plug that cable into the laptops ethernet port
- Configure the laptop to have the same IP address as the controller we took the cable from, including subnet mask, gateway, and DNS server
tested with my Laptop it is working (ssh and web) and also access internet .
But still cannot from our compellent .
From My Laptop tracert 76.164.8.174
15 267 ms 267 ms 268 ms
16 267 ms 256 ms 258 ms 209.63.66.4
17 * * * Request timed out.
18 256 ms 256 ms 256 ms 76.164.8.174
Trace complete.
Thanks
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
June 15th, 2017 07:00
Hello liyabru,
Which Compellent system do you have as you didn’t state that in your post? Second when you say Scons is that a host that you are trying to connect to your Compellent?
Please let us know if you have any other questions.
liyabru
1 Rookie
•
20 Posts
0
June 15th, 2017 19:00
Hi,
Compellent model 4020 ,I tried to connect SecureCons (ssh,8443) from our compellent but got an error.
already checked internal network no more blocking.
Thanks
DELL-Sam L
Moderator
•
7.6K Posts
0
June 16th, 2017 09:00
Hello liyabru,
Have you followed the steps listed in the Admin guide on page 232 to make sure that your setup is correct. Here is a link to the Admin Guide just in case you need it. http://topics-cdn.dell.com/pdf/dell-compellent-sc4020_Administrator%20Guide_en-us.pdf
Please let us know if you have any other questions.