This post is more than 5 years old
3 Apprentice
•
33 Posts
0
1684
April 11th, 2019 09:00
Remove a 300GB SATA disk from a Compellent and pin it into another compellent
Is it possible to remove a 300GB SATA disk from a compellent (e.g. SC4020) and pin it into another compellent (e.g. SC4020)? And if, so are there particular steps to follow?
No Events found!
DELL-Bob Mi
2 Intern
•
230 Posts
1
April 11th, 2019 11:00
Refer to page 288 of the Dell Storage Manager 2018 Administrator's Guide on how to Release a Disk
https://topics-cdn.dell.com/pdf/dell-storage-manager_administrator-guide3_en-us.pdf
Once the disk is ready to be removed then you should be able to move it to the other system, as long as it is a model and firmware recognized by the other system.