This post is more than 5 years old
1 Message
0
24000
September 9th, 2015 12:00
More fan noise after upgrading SC8000's to 6.5.30...
Curious if anyone has noticed an increase level of cooling fan noise after upgrading their SC8000's to 6.5.30? Upgraded over the weekend and the controllers would usually increase the fan speeds during boot, then settle back down. After the upgrade, ours haven't seems to settle back to their previous volume. Processor utilization seems normal and systems running OK, we just want to make sure there isn't something else causing the extra fan speeds.
Thanks.
No Events found!
BVienneau
115 Posts
3
September 9th, 2015 13:00
Yes, this is something that they did on purpose. I believe there is a CSTA on it. I'd link to it but I'm on my moblile. You should be able to find it in the Knowledge Center.
kerberos451
13 Posts
0
September 11th, 2015 14:00
I also read about the increased noise, but cant seem to find the reference now.
rickster4
1 Message
0
September 15th, 2015 21:00
Here is the CSTA
kc.compellent.com/.../CSTA%20-%20SC8000%20Fan%20Speed%20Increase%20With%20iDRAC%20Version%201.56.pdf