Unsolved
This post is more than 5 years old
2 Posts
0
15713
August 4th, 2017 13:00
Compellent SC shutdown / startup
Hi
I've a SC4020 storage with a SC220 expansion enclosure and I would like to confirm the correct shutdown and startup process.
Shutdown:
1st: Shutdown both SC4020 controllers from webinterface
2nd: Wait SC4020 shutdown
3rd: Shutdown SC220 using power switch on each PSU
Startup:
1st: Start SC220 using power switch on each PSU
2nd: Wait SC220 startup
3rd Start SC4020 using power switch on each PSU
Is it the correct process?
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
August 7th, 2017 10:00
Hello DBri1,
You are correct in your shutdown & startup steps. One thing that I would add is that you stop all I/O before you shutdown both controllers on your SC4020.
Please let us know if you have any other questions.
GSXRMANTX
3 Posts
0
March 25th, 2020 12:00
Is there any way via BMC or console to power the unit back up after you used the Storage Manager to shutdown.
Seems crazy you have no way in via an ilo/bmc/console/sp/rlm perspective?
DELL-Sam L
Moderator
•
7.6K Posts
0
March 25th, 2020 14:00
Hello GSXRMANTX,
There is not a way to power on a Compellent system other than the power switch. Your compellent needs to be powered on for 10 minutes before your idrac can be used.
Please let us know if you have any other questions
GSXRMANTX
3 Posts
0
March 25th, 2020 18:00
Thanks Sam, always wondered if was possible.
Speaking of idrac on my sc2020 dont really have an idrak, have this BMC logon, however really dont see much of the purpose. What do most use that for on teh SvC2020? Lastly wondered if you knew of any way to change the offset of the fans? Seems pretty loud and overpowers three 620s in same rack (each with 8 drives).
Thanks for any feedback!
GSXRMANTX
DELL-Sam L
Moderator
•
7.6K Posts
0
March 31st, 2020 13:00
Hello GSXRMANTX,
The BMC is used if you had a fluid FS system attached to your SCv2020. Do you know the current version of SCOS that is installed, or have you upgraded the SCOS recently?
Please let us know if you have any other questions.