This post is more than 5 years old
1 Rookie
•
7 Posts
0
1867
July 4th, 2019 20:00
Cannot release the last disk from the disks folder
Hi guys,
I'm trying to re-setup Dell SCv2020 from the scratch.
I'm trying to release the last disk and delete the disks folder but can't see Release Disk option in the context menu for that last disk.
Just wondering if it should be like this.
Thanks.
No Events found!
DELL-Bob Mi
2 Intern
•
230 Posts
1
July 5th, 2019 09:00
Hello Nightwolf_82,
It looks like you are releasing all disks on your system. In general there are 5 disks in each system which hold the configuration files. As you can see there is a small amount of data on this disk which is most likely configuration files.
If you want to reconfigure the system completly then refer to page 301 of the Dell Storage Manager 2016 R3 Administrator’s Guide: https://topics-cdn.dell.com/pdf/storage-sc2000_administrator-guide_en-us.pdf
Reset a Controller to Factory Default
Reset a controller to apply the factory default settings, erase all data stored on the controller, and erase all data on the drives.
Prerequisites
The Storage Center must be an SCv2000 or SCv3000 series controllers.
The controller must be running Storage Center version 6.7 or later.
There is step by step procedure on that page. Remember - Resetting the controller to factory defaults erases all information on the controller and all data on the drives.