Unsolved
This post is more than 5 years old
1 Rookie
•
29 Posts
0
3513
October 30th, 2015 08:00
Which version of inq.exe will work with Windows 2012?
Hi,
I am trying to get inq.exe to work on Windows 2012. At this time, I cannot get it to list the luns properly.
The same script\inq.exe worked properly on Windows 2008 R2 so something happened when we switched to Windows 2012.
This is what I get when I run the script on Windows 2012.
C:\Snap>inq
Inquiry utility, Version V7.3-1214 (Rev 0.1) (SIL Version V7.3.0.1 (Edit Level 1214)
Copyright (C) by EMC Corporation, all rights reserved.
For help type inq -h.
Does anyone know what is required to run inq on Windows 2012.
-------------------------------------------------------------------
DEVICE :VEND :PROD :REV :SER NUM :CAP(kb)
-------------------------------------------------------------------
C:\Snap>
umichklewis
3 Apprentice
•
1.2K Posts
0
October 30th, 2015 12:00
It looks like you're using an INQ ulitiy from Solutions Enabler 7.3, which is pretty old. You'll want to upgrade to Solutions Enabler 7.6 at the very least; consider Solutions Enabler 8.0 if it suits you. I have a 2008R2 VM running SE 7.6.1 below.
U:\inq
Inquiry utility, Version V7.6.1.0 (Edit Level: 1755) built with SYMAPI Version V7.6.1.0 (Edit Level 1755)
Copyright (c) [1997-2013] EMC Corporation. All Rights Reserved.
dynamox
9 Legend
•
20.4K Posts
0
November 4th, 2015 18:00
try running inq in "run as administrator" command prompt