Unsolved
This post is more than 5 years old
1 Message
0
323
November 27th, 2013 14:00
Troubleshoot SNMP integration
Hello community, this is my first post
I am integrating a EMC AX4-5 with SNMP, I have done it before, and it's a quite simple procedure.
The problem is that, I am able to receive the Test trap, butwhen I try to generate a real trap (i.e. rebooting one of the SPs) it does not generate any trap.
How can I troubleshoot this from the Navisphare GUI? Any other recommended action?
Thanks in advance for your help
Regards
No Events found!
christopher_ime
2K Posts
0
November 27th, 2013 15:00
Firstly, welcome to the forums, and above all, thank you for being an EMC customer.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "CLARiiON Support Forum".
CLARiiON Support Forum