Unsolved
This post is more than 5 years old
35 Posts
0
735
May 16th, 2013 01:00
Trouble connecting Clariion and Celerra boxes from Unisphere
Hello,
We have an environment with 7 Clariion with Celerra boxes in 7 different locations.
We are replicating all the boxes to DR boxes.
The problem is whenever I connect to any one box to manage I get the below error:
If I click on Accept fo Session I can get in and then if I try to go in All systems and try to ACCEPT ALWAYS, I get below screen.
I cheked my Java verison at it is version 7 update 11 which is standard for all workstations.
Just a note that, my colleague with same standard build with same Java version can access the boxes without any issues.
Any suggestions please
Regards
Harshal
No Events found!
AnkitMehta
1.4K Posts
0
May 16th, 2013 05:00
Hi Harshal,
Go to Java Control Panel
Temporary Internet Files > Setting > Tick Mark - Keep Temporary files on my computer
Delete Existing Files
Allocate Maximum space
Security Tab - Set it to High.
I am sure setting will be as mentioned already, try clearing the Java Cache from console and try again and let me know.
harshgw2k3
35 Posts
0
May 16th, 2013 07:00
Hi Ankit,
Did the steps suggested by you.
All the settings were already on what you suggested. Just cleared the Cache and tried again.
Only if I accept for current session, I can connect/manage that box.(see pic, ones which are resolved are accept for sesssion)
If I accept always through manage certificates, it shows unkown.(the ones which I accept always are unkown)
May be complete uninstall/install of Java is needed?
Regards
Harshal
AnkitMehta
1.4K Posts
1
May 16th, 2013 08:00
If it is working fine on different workstation, you may try that step.
Also, you might want to refer to https://community.emc.com/thread/146572