Unsolved
This post is more than 5 years old
2 Intern
•
222 Posts
1
530
June 16th, 2015 10:00
Translate GUI command to naviseccli command?
I have a CX array in a remote datacenter, and the admin connectivity is very poor. The Unisphere gui keeps hanging and is really difficult to use.
Im looking for a way to translate the GUI button presses into actual naviseccli commands that I can run from my Unix server.
Specificaly, im trying to press the "Reconnect" button under the host menu to bring "~management" paths into the host path list.
I already have many cli commands down, but this is one I don't know how to translate into cli.
No Events found!
kelleg
4.5K Posts
1
June 19th, 2015 13:00
There is not a single command that reconnects the paths, but the "StorageGroup" commands may be used.
glen
kelleg
4.5K Posts
0
June 29th, 2015 11:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen