Simple install order question

Hello Brian

1. Powerpath can be installed on the Host first. (though it will not see any devices yet)

2. Then you can zone the fabric.

3. Install Unisphere Host Agent.

4. In the Unisphere check the connectivity status and make sure the Host initiators show Logged in and registered.

5. Create a storage group and add the host and the luns to that.

6. Verify on the host side that HBA sees the luns from Clariion

7. Go to device manager and scan for hardware changes

8. Verify now powerpath see the devices.

Please mark this reply 'answered', if this answers your query.