Unsolved
This post is more than 5 years old
1 Message
0
1164
April 30th, 2013 13:00
Setup of cx-480
Can someone tell me the default IP address for a cx-480.
Thanks
No Events found!
Unsolved
This post is more than 5 years old
1 Message
0
1164
April 30th, 2013 13:00
Can someone tell me the default IP address for a cx-480.
Thanks
Top
dynamox
9 Legend
•
20.4K Posts
0
April 30th, 2013 13:00
there is no default IP address, it's whatever you set it to during the initial config.
AnkitMehta
1.4K Posts
0
April 30th, 2013 14:00
Hi mgmmu
It seems you have forgotten the IP Address to access the CX4.
Anyhoo, You can connect using to CLARiiON using Service LAN ports. You would only need to connect to one either SPA or SPB.
Configure your service laptop to use the address 128.221.1.249/24, plug the cable to Service LAN Port and try to ping 128.221.1.250 or 128.221.1.251 (the default service addresses for SPA and SPB). If this works you can browse to http://128.221.1.250 and try with the default access credentials i.e. (admin/password). If this doesn't work out for you then you will need to create a PPP Connection to either of the SP.
Refer: How to connect to a Clariiion through PPP Connection
Ankit Mehta
kelleg
4.5K Posts
0
May 2nd, 2013 12:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen