Unsolved
This post is more than 5 years old
34 Posts
0
2829
March 6th, 2013 06:00
Replace Standby Power Supply in CX300
I have a CX300 that has a failed Standby Power Supply. I have a replacement part but I cannot determine how to remove the old part in order to install the new part. There are screws on the front and back panels where the standby power supply is mounted. I unscrewed all the screws but I cannot see how the part come out of the system. I looked at EMC's website but I do not find any documentation on how to replace this part. The Customized Replacement Documentation web page offers no information on this process.
The unit is out of warranty so that is why I have to replace the part myself.
Can anyone offer any information on the replacement process?
No Events found!
Vipin VK
2 Intern
•
812 Posts
0
March 6th, 2013 07:00
Once the six screws in front are removed, you can remove the front plate. Once this plate is removed, both the SPSs will be visible and you can push the one(the SPS to be replaced) from behind and can be removed out.
mykul_71
34 Posts
0
March 6th, 2013 07:00
Thank you for the information. I will try doing that. Thanks!!
SPSPros
2 Posts
0
October 14th, 2013 08:00
There is an online tutorial on how to replace a CX series SPS here:
How To Replace an EMC CX3 SPS