Unsolved
This post is more than 5 years old
6 Posts
0
1259
April 5th, 2013 22:00
Procedure to add new disks to a new enclosure
We have a CLARiiON CX-240 array that we have had for 3 years, running FLARE 30.
We just added a new enclosure to it. We now need to add all the disks to the enclosure. They are 2TB SATA disks.
What is the best practice method for adding the disks to the enclosure, and then importing them into the array?
Also need to know how to add them to an existing Storage Pool (expand it), in 2 + 2 configuration (not default 4 + 4).
Please advice.
No Events found!
kelleg
4.5K Posts
0
April 8th, 2013 15:00
If the new DAE is already installed, then you just need to add the disks to the DAE - one at a time, wait for the green lite for each one before adding more.
For Pool expansion, there is good information in the Help function.
glen
Anonymous User
457 Posts
0
April 22nd, 2013 07:00
Hi,
I agree with Glen.., you may also generate document on adding disk drives from below mentioned site:
http://corpusweb130.corp.emc.com/upd_prod_CX4/
Regards,
Suman Pinnamaneni
Swapnil_Pandey
86 Posts
0
December 4th, 2013 12:00
Hello Suman,
Thanks for the information. Is there any similar document procedure generator for VNX or VNX2 also?
Please suggest...
AnkitMehta
1.4K Posts
0
December 4th, 2013 14:00
Hi Swapnil,
Please, refer to: https://mydocs.emc.com/VNX/requestMyDoc.jsp
Ankit
Swapnil_Pandey
86 Posts
0
December 6th, 2013 06:00
Thanks Ankit. This helped....