Problème navihost sur baie clarion CX4-120 et Aix 6.1

Bonjour SARTOF!

You may move this thread as is to our Spanish Support Community (https://community.emc.com/community/support/spanish) or I would request you to translate the query in English so that it can be answered by our Community Experts!

Ankit

can you please use English ?  Merci

Thanks for recommending us AnkitM, however I believe sartof posted in French instead of Spanish.

Here is my "two cent" translation of this thread leveraging Google Translate:

Problem navihost bay clarion CX4-120 and Aix 6.1

Hello,

I encounter the following problem on AIX 6.1 with SP2 TL8 navihost 6.26.32.0.72 and configured for MPIO (we boot on san)

No host information available. During this manipulation "Update Host Information" on a server assigned to the LUN.

Thank you for your help

I hope this helps!

Roberto

Hello,

Thank you for your help. next time I posterer English

Thank you to you for your interest in my problem

Waiting for your answers

Regards

AIX host can communication with SPA/SPB on CX4, for example you can run a tracert or a ping ?

Ping is OK

the host was recorded manually because we are in boot on san. navi agent was installed after the operating system has been installed it

was the host registered manually or by using Navi agent ?

For the "Update Host Information"  there must be the "EMC Host Agent for AIX" installed on the AIX host. The host must also be manually registered with the correct LUN IP address of the host, the WWN of the HBA's and the hostname.

On support.emc.com, go to the Support By Product and select the CX4 series. You can search for information on Boot-From-San or you can look for the "EMC Host Connectivity Guide for AIX", which contains a section for booting the host from the SAN.

glen