Unsolved
This post is more than 5 years old
1 Message
0
437
November 20th, 2014 06:00
NTP sync issue on only one CX4-240 SPB (5 CX4's in one domain)
Hi,
we have a total of 5 CX4-240 in our domain and NTP is configured on the domain. All the CX4's are syncing fine with the NTP. However, SPB of one CX4-240 is showing error with NTP sync and the SPA is in sync with the NTP.
Cannot get this checked with EMC as support contract was not renewed.
I just wonder what might be the issue. If anyone have seen this, please assist
No Events found!
kelleg
4.5K Posts
0
November 24th, 2014 09:00
Without logs to see that is occurring, it could be a network connection on the SPB Management Port. Check the switch port that SPB connected to and see if the switch port setting is set to auto/auto.
Is there a Celerra in the SAN - if so, check to see if the Control Station is setup to set the time on the SP.
Try Restarting Management Server on SPB (/setup)
glen