This post is more than 5 years old
3 Posts
0
3885
November 8th, 2012 08:00
Navisphere Host Agent download for HP-UX
Hello at all,
I'm searching the navisphere host agent for HP-UX. It is available under
Navisphere Server Software subsection of Software and licencing section of powelink webiste
Unfortunatelly I'm unable to find the host agent version for HP-UX platform.
Could someone give me any information to download this specific version?
Thank you for any support.
Adriano
No Events found!
JonK1
2 Intern
•
247 Posts
0
November 9th, 2012 04:00
Hi Adriano,
I have verified it on a couple of HP-UX servers over here and a procedure; you can just use the current/latest version. There is also no difference between the NAVIAGENT for 11.11 and 11.31.
So either use the version you have currently installed on the HP-UX 11.31 server and copy it to the HP-UX 11.11 server, or download the latest version from the CLARiiON software downloads page (link is here). Navisphere was renamed to Unisphere, so you will have to look for the Unisphere Host Agent.
Hope that helps!
Jon
JonK1
2 Intern
•
247 Posts
1
November 9th, 2012 01:00
Are you looking for a specific version? If I'm not mistaken, the Unisphere host agent is backwards compatible with older versions, so just grab the latest.
acapruz
3 Posts
0
November 9th, 2012 04:00
Hello Jon,
thank you for you answer. I'm searching a navisphere host agent version compatible with hp-ux 11.11 and clariion cx3-80. I have a different server with hp-ux 11.31 os with navi cli and navi agent installed
NAVIAGENT 6.29.0.6.1 Navisphere Disk Array Management Tool (AGENT)
NAVICLI 6.29.0.6.1 Navisphere Disk Array Management Tool (CLI)
For Hp-ux 11.11 I found only the NAVICLI software,I'm unable to find the NAVIAGENT software (I suppose what i need is the NAVIAGENT sw).
Thank you for any support.
Adriano
acapruz
3 Posts
0
November 9th, 2012 05:00
Hello Jon,
Many thanks for your support, I didn't know about difference between Unisphere and navisphere.
Adriano
christopher_ime
2K Posts
2
November 12th, 2012 00:00
You can verify what Jon has already mentioned by reviewing the "EMC Unisphere Host Software/CLI and Utilities for VNX™ OE for Block Release Notes". For instance, the latest document:
EMC Unisphere Host Software/CLI and Utilities for VNX OE for Block Version 1.2.1.1.0017
https://support.emc.com/docu43144_Unisphere_Host_Software/CLI_and_Utilities_for_VNX_OE_for_Block_Release_Notes_Version_1.2.1.1.0017.pdf
Reminds us of the following:
[...]
Unisphere management software requirements
EMC recommends that you always use the current shipping version of Unisphere Agent and Unisphere. Unisphere and Navisphere CLI are compatible with older versions of software, but newer features may not be available, depending on your combination of software versions.
[...]
Then Table 3 notes the following (I'll assume you are running the latest version of FLARE for the CX3, but the results are the same for 03.24):
VNX OE FLARE
Host Agent
Classic CLI
Secure CLI
Unisphere Client, Server Utility, and Initialization Tool
03.26 (CX3),
02.26 (CX)
1.2.0.1
1.1.0.1
1.0.0.1
6.29
6.28
6.26
6.24
6.22.20
6.22
6.20
6.19
6.28
6.26
7.32
7.31
7.30
6.29
6.28
6.26
6.24
6.22.20
6.22
6.20
6.19
1.2.0.1
1.1.0.1
6.29
6.28
6.26