Unsolved
This post is more than 5 years old
2 Intern
•
470 Posts
0
3142
May 10th, 2014 14:00
naviseccli command to create and add new host initiators
I zoned in some new blades and the wwns are shoing up under connectivity status.
What is the command to create the hosts and add the new initiators to the host?
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
May 10th, 2014 20:00
How to manually register a host HBA with a CLARiiON array using Navisphere Manager and CLI 6.4?
Archuperi721
110 Posts
0
May 11th, 2014 06:00
Follow the instructions shared by Dynamox....
And the command to register a HBA, it will add the server into storage group. In certain scenarios you need to ensure the LUN's to be shared / allocated. However, the storage - server has to be zoned on the same ports chosen during registration, vice versa
naviseccli -h ss1_spa storagegroup -setpath -gname Group1 -hbauid 10:00:00:00:C9:20:DE:0C:10:00:00:00:C9:20:DE:0C -sp a -spport 0 -arraycommpath 1
kelleg
4.5K Posts
0
May 29th, 2014 09:00
You might also want to look at the mydocs.emc.com site - this contains the installation instructions for adding hosts to an array.
For hosts you should also be using the EMC Host Agent utility - this will automatically register your new hosts to the array with real hostnames and not just the WWN on the HBA's. The host installation guides will show you how to do this.
glen