Unsolved
This post is more than 5 years old
2 Posts
0
1060
February 7th, 2014 12:00
Maintenance port access
Hi -
Sys Ad left with login and password so I am trying to add a user to CX4-120 system via maintenance port. I have succesfully connected via PPP using clariion/clariion! as username and password (succesfull dhcp) I can ping 192.168.1.1 but get nothing when I put address into browser.
Instruction indicate that yous should try main port however no username password combination worrks to open PPP connection.
Any ideas?
Thanks
John
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
February 7th, 2014 12:00
did you try the service port route as well ?
Reset login credentials on clariion storage — patata.homeip.net
dynamox
9 Legend
•
20.4K Posts
0
February 7th, 2014 12:00
John,
did you try to add /setup to 192.168.1.1
johnnyh63
2 Posts
0
February 7th, 2014 12:00
tried /setup - /setup.html - /start - /start.html
Roger_Wu
4 Operator
•
4K Posts
0
February 7th, 2014 17:00
It's CX4, have you tried the Service LAN port? It's a RJ45 port:
"D" port is the Service LAN port. The default IP addresses of two SPs are:
SPA: 128.221.1.250 Subnet Mask 255.255.255.248
SPB: 128.221.1.251 Subnet Mask 255.255.255.248