Unsolved
This post is more than 5 years old
2 Intern
•
470 Posts
0
564
August 7th, 2013 16:00
lost all paths to storage after checking remaining paths in navisphere
when i setup my esxi host, I only had 4 paths to a lun. So I went into navisphere and on the properties of the host, under advanced, i saw that 4 paths were unchecked. So I checked those. then I noticed that all my paths from vm to storage were lost and all luns were grayed out. any idea why this happened
No Events found!
kelleg
4.5K Posts
0
August 13th, 2013 12:00
Any change you make on the array (unchecking the path boxes) MUST be followed by a host reboot. When you change the settings on the array for a path (failover mode, arraycommpath/connection) you must reboot the host.
For a connected array that can see the LUNs, those boxes should have been checked.
glen