Unsolved
This post is more than 5 years old
3 Posts
0
459
July 17th, 2014 13:00
Linux Connected to CX and VNX
I have a linux physical server with oracle database connected to CX320.
Physical server is connected to Brocade san switch.
I would like to move the database from CX320 to vnx5300.
What is the best steps to do to copy from cx to vnx.
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
July 17th, 2014 13:00
if your client uses ASM, present new LUN from VNX and let the rebalance the new LUNs in and then remove the old CX LUNs ..online process, any DBA should know how to do it.
If you don't use ASM then look into SANCopy or PowerPath Migration enabler (must be using PowerPath of course, not DM-MPIO).
kelleg
4.5K Posts
0
July 21st, 2014 12:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen