Unsolved
This post is more than 5 years old
21 Posts
0
594
May 23rd, 2014 13:00
How can i add an additional DAE to a Clariion CX3-20?
My task at hand is adding an additonal DAE to our current Clariion CX3-20, when i currently have 8 DAE's installed and configured and all Enclosure addresses are taken. The bus ID that all DAE's are under is Bus 0. What like to know is if when i connect my 9th DAE and set the enclosure address to 0 will it switch over to Bus ID 1 or default to Bus 0 but mark it as enclosure address 8
Any help will be greatly appreciated.
No Events found!
Roger_Wu
4 Operator
•
4K Posts
0
May 25th, 2014 18:00
CX3-20 supports 8 enclosures. You can not add more DAE now...
CX3-80
CX3-40f
CX3-40
CX3-40c
CX3-20f
CX3-20
CX3-20c
CX3-10c
Disks
480
240
240
240
120
120
120
60
Enclosures
32
16
16
16
8
8
8
4
BowAdmin
21 Posts
0
May 27th, 2014 13:00
Thanks for the response, it was well appreciated.
kelleg
4.5K Posts
0
May 29th, 2014 08:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen