Unsolved
This post is more than 5 years old
5 Posts
0
533
January 22nd, 2014 09:00
Extracting Multipathing Information
Hi!
I am due for a flare code upgrade on our Clariions and Celerras CX480, and would appreciate if somebody can guide/help me?
To prevent any surprises after the flare code upgrade, I want to make sure my current multipathing software/driver will support the new flare code, I am looking for a way to have this information without logging on manually onto each server? Is there a way from within Clariion? or any additional automation method I can use? I am not good with scripting and the time frame is tight !
Thanks in advance!
No Events found!
Vipin VK
2 Intern
•
812 Posts
0
January 22nd, 2014 09:00
From Navisphere/Unisphere Manage, you can check for multipathing in connectivity status . Check if all the hosts are having registered and logged in paths from both Storage processors. Which multipathing software you are using on the hosts ?
dynamox
9 Legend
•
20.4K Posts
2
January 22nd, 2014 10:00
to be really sure you will need to login to each host. Just because PowerPath is installed does not mean that's configured and licensed properly.
Roger_Wu
4 Operator
•
4K Posts
0
January 22nd, 2014 18:00
You can aslo try Navisphere CLI:
naviseccli -h port -list -all
naviseccli -h port -list -hba (specific to HBA)
The above commands are specific to info about the connectivity status which provides you logged in and registered status.
kelleg
4.5K Posts
0
February 11th, 2014 14:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen