Unsolved
This post is more than 5 years old
2 Posts
0
645
October 9th, 2013 12:00
EMC2 Clariion
I'm working with a group with little documentation and need to get into the EMC2 to look at configuration. I see remnants of Navisphere but nothing installed (GUI) and none of the old links work.
Looking for instructions on how to get into this SAN and find the model number as well.
Any assistance is greatly appreciated.
Regards
No Events found!
Roger_Wu
4 Operator
•
4K Posts
0
October 14th, 2013 01:00
If you already have its IP address, admin account and password, you can point your broswer to its IP then log into the storage to get what you want.
If you lost either the IP or the admin account, you have to use a serial cable and establish a PPP connection to its COM port to find IP and create a new admin account. You can refer to https://community.emc.com/docs/DOC-8449 for the details. If you are using Windows 7, you have to create a COM port modem first, please refer to https://community.emc.com/message/574428#574428.
HDNetEng
2 Posts
0
October 15th, 2013 05:00
Sorry for my delayed response, the reply was filtered.
Thank you.....I will give this a shot.
Regards
kelleg
4.5K Posts
0
October 15th, 2013 12:00
If by EMC2, you're actually talking about the new VNX2 - the Next Generation VNX, then you should go to emc.support.emc/products and do a search for VNX. The new models are the 5400, 5600, 5800, 7600 and 8000. There is a lot of documentation about the new VNX2 available.
glen