This post is more than 5 years old
4 Operator
•
1.4K Posts
0
1445
May 16th, 2012 19:00
Does cx3-10c support IBM SVC?
hi, all
we have a problem that IBM SVC is causing excessive lun trespass on my cx3-10c array with flare code 3.26.10.5.032. I don't know if the failover mode was set correctly. May i know is SVC supported? And if so, where can I find the failover mode settings? emc99467 doesn't give me the answer.
thank you!
No Events found!
Storagesavvy
474 Posts
2
May 16th, 2012 20:00
EMC does not support 3rd party virtualization products, but IBM does support the CLARiiON CX, CX3, CX4 systems behind SVC. You will need to look at IBM’s documentation for configuration information. The below table applies and I found it at the following URL… http://publib.boulder.ibm.com/infocenter/storwize/ic/index.jsp
Configuring > Configuring and servicing external storage systems > Configuring EMC CLARiiON systems > Configuring the EMC CLARiiON controller with Access Logix installed
Option
EMC CLARiiON default setting
Storwize V7000 required setting
WWPN
N/A
Any
WWN
N/A
Any
Host name
N/A
Any
SP port
N/A
Any
Initiator type
3
3
ArrayCommPath
Enable
Disable
Failover mode
0
2
Unit Serial Number
Array
Array
Hope that helps..
Richard J Anderson
zhouzengchao
4 Operator
•
1.4K Posts
0
May 17th, 2012 18:00
that's really helpful. thank you!!