Unsolved
This post is more than 5 years old
1 Message
0
950
December 3rd, 2013 11:00
Does Clariion restrict RAID types based on # of Disks available ?
I have found that it is when adding a Raid group I am not able to select Raid 5 and I believe this is due to a minimum requirement that is unknown to me in regards to the # of available Disks
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
December 3rd, 2013 12:00
min 3 disks for RAID-5
Roger_Wu
4 Operator
•
4K Posts
1
December 3rd, 2013 17:00
A RAID 6 group usually has 6 or 12 disks, but can have 4, 8, 10, 14, or 16 disks. A RAID 5 group must include at least three disks. A RAID 3 group must include five or nine disks. A RAID 1/0 group must include at least two disks.
And if you are using VNX, I was told that you can only choose RAID 6 for NL-SAS disks.
Ekaki
1 Rookie
•
40 Posts
0
December 8th, 2013 21:00
I think they r right .U need to select appropriate disk no .Then those option will be enable
kelleg
4.5K Posts
0
December 13th, 2013 11:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen