This post is more than 5 years old
2 Intern
•
222 Posts
0
1791
April 27th, 2015 06:00
CX4 pool stuck?
We have run out of spare disks, and due to continued disk failures, I need to delete a pool and make it smaller.
Unfortunately, a drive failed during the drop operation, and it now appears stuck. It's been several hours with no progress.
I have 90 drives in the pool, and I need to get the pool deleted ASAP in order to create several smaller Raid Groups, which have better flexability than a single large pool.
Pool Name: Pool2
Pool ID: 2
Raid Type: r_6
Percent Full Threshold: 70
Description:
Disk Type: Fibre Channel
State: Destroying
Status: OK(0x0)
Current Operation: Destroying
Current Operation State: Failed
Current Operation Status: The unbind operation has failed; the LUN may be private (0x40008053)
Current Operation Percent Completed: 25
Raw Capacity (Blocks): 24670664832
Raw Capacity (GBs): 11763.890
User Capacity (Blocks): 13527456000
User Capacity (GBs): 6450.394
Consumed Capacity (Blocks): 0
Consumed Capacity (GBs): 0.000
Available Capacity (Blocks): 13527456000
Available Capacity (GBs): 6450.394
Percent Full: 0.000
Total Subscribed Capacity (Blocks): 0
Total Subscribed Capacity (GBs): 0.000
Percent Subscribed: 0.000
Oversubscribed by (Blocks): 0
Oversubscribed by (GBs): 0.000
usao
2 Intern
•
222 Posts
2
April 27th, 2015 07:00
Got this worked out.
The GUI would not allow me to re-run the "delete" command, but the CLI did, so I ran another "delete" against the pool and it's continuing the delete process now.