Unsolved
This post is more than 5 years old
1 Rookie
•
30 Posts
0
479
June 11th, 2014 10:00
CX4-960 FC I/0 Module move from one array to another
Can an I/O module, specifically 8gb FC I/O modules currently installed in a CX4-960 Block array be removed from one storage array/sp and used in another CX4-960 array?
We have an old storage array that we use for light test and development with unused FC Modules. We would like to use these unused modules in on of our production storage arrays in need of additional FC ports.
Thank You
Terry
No Events found!
Anonymous User
457 Posts
0
June 12th, 2014 06:00
Yes you can use.
KDH_-_
1 Rookie
•
20 Posts
0
June 12th, 2014 06:00
Yes they will work, but rember to use the SolVeDesktop Procedure generator, to remove and insert the I/O Module
But there is an anohter thing to take in focus, the Support ! of the I/O module
Parts following the purcased array's support aggrement.
KDH_-_
1 Rookie
•
20 Posts
0
June 12th, 2014 06:00
But if both arrays is out of Service, then you don't have this issue