Unsolved
This post is more than 5 years old
2 Posts
0
733
September 3rd, 2014 12:00
Cx4-480 Instalation help
Hi, i bought Cx4-480 and i don`t know where i start? Can you help, please?
In these server are installed, i think, Windows Server Storage, there are two SAN`s and cables. Aparently the server is complete.
But i dont know IP`s to connect or try to do sth. I`ve been read some articles and no one help me that way I need.
I hope that somebody can help.
Thanks.
Ps. Sorry for my poor english
No Events found!
Roger_Wu
4 Operator
•
4K Posts
1
September 3rd, 2014 18:00
You can generate the step-by-step guides on CX4 support site:
http://corpusweb130.corp.emc.com/upd_prod_CX4/
kelleg
4.5K Posts
1
September 8th, 2014 08:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
Matheus Lanca
2 Posts
0
September 8th, 2014 10:00
OK! I`ll try! Thanks
VivekSoni
24 Posts
0
October 14th, 2014 02:00
Hello Glen,
I had posted another question and one of the community member was kind enough to help me out. But I do not see a way to mark his answer correct and close the discussion forum. Can you please elaborate on teh steps to do it ?
Thanks in advance.
kelleg
4.5K Posts
0
October 17th, 2014 14:00
Only the person that opened the thread can mark the thread answered
glen