This post is more than 5 years old
4 Posts
0
447
July 9th, 2013 03:00
cx3-20 snmp support for monitoring
Hello,
We have several cx3 Clariion's. But we don't have a clou how it's performing.
As we have a snmp monitoring system, we would like to get information from the CX3's.
We would like to have graphical information like: disk io's / cpu / etc etc.
I am searching for MIB files ...... but can't find any.
Who can help me, to get some graphical information out of our CX3's ?
No Events found!
umichklewis
3 Apprentice
•
1.2K Posts
0
July 9th, 2013 05:00
The CLARiiON uses the FibreAlliance MIB (search the Support site - it's fairly high on the list), which primarily returns status information (array in error state, etc.), but not much on the performance side. This hasn't changed much in many, many years. VNX Monitoring and Reporting does not support CX3 at last review, so tor performance monitoring on a CX3, you're basically stuck with using Navisphere Analyzer to extract statistics and graph them yourself.
Some third-party products, like SolarWinds, are able to integrate with the CX3 and pull statistics data via "navicli" and "naviseccli" scripts, but you could just as easily pull the same information yourself for free.