Unsolved
This post is more than 5 years old
23 Posts
0
653
May 30th, 2013 08:00
Clariion SP Physical Port to Logical Port Reference
In another thread I was asking a question about a Clariion CX4-960 and specifically the Fiber Ports. My previous thread shed some light as I was not aware that the Physcial Ports Numbers change to logical port numbers in Command Line or Unisphere. Can someone steer me in the direction of documentation that would help me connect the dots? I'd like to take a Clariion with SPA and SPB and cross reference which Physcial Ports translate to what Logical Port Numbers. I'm having a hard time in my mind drawing the connection and it is confusing me when looking at the zoning etc.
Thank You
Terry
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
May 30th, 2013 11:00
i updated that thread with more pictures, see if that helps
kelleg
4.5K Posts
0
June 7th, 2013 09:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen