This post is more than 5 years old
5 Posts
0
1910
July 18th, 2013 03:00
Clariion FC4700-1
Hello!
I have been given a task to shutdown our old FC4700, being novice in the storage arena especially EMC products I am struggling and would appreciate any guidance or help towards achieving this. I have been only given IP's for the SP's, and after logging onto 1 of them, have noticed Navisphere 6 and after getting in have tried to look for any options to see if there is a way to shutdown the unit, but haven't found any thing useful.
Thanks in advance and would be grateful for any assistance received.
Regards
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2013 05:00
click on the link i provided above and then select how to powerdown a CX500
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2013 04:00
wow, is that box going to the local museum ?
same procedure as any other clariion
CLARiiON FAQ Help
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2013 05:00
he/she needs to follow the procedure, starting with SPS ..etc
Aswinkumar_bafd83
46 Posts
0
July 18th, 2013 05:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2013 05:00
FC4700-2 was my first EMC array, i still have the manual somewhere
Aswinkumar_bafd83
46 Posts
1
July 18th, 2013 05:00
try http:// /setup
I think GUI we can't shutdown the storage box.
try to use cli
navicli -User -Password -scope 1 -Address shutdown SP / shutdownSP
navicli -User -Password -scope 1 -Address shutdown SP / shutdownSP
if you have physical access to the array, directly power down the array.
make sure all the hosts are unmasked.
downlod appropriate navicli file from below link and install, run the above commands.
https://support.emc.com/search/?text=navicli%20for%20FC%20array%20&facetResource=DOWN
Vipin VK
2 Intern
•
812 Posts
0
July 18th, 2013 05:00
dynamox thanks for the procedure. I don't think somewhere else we can get it now.
rehmanmemon
5 Posts
0
July 18th, 2013 05:00
Hi!
Thanks for your response. What would be the process though? I am quite new to the EMC stuff!
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2013 07:00
that's kind of slow
, guys are slacking off
Vipin VK
2 Intern
•
812 Posts
1
July 18th, 2013 07:00
Never had an opportunity to see an FC series system, and I don't think I will have. You are a lucky one..:)
rehmanmemon
5 Posts
0
July 18th, 2013 07:00
And this one is going in for "secure" destruction, even too old for a museum
rehmanmemon
5 Posts
0
July 18th, 2013 07:00
Guys, thank you all for your responses, appreciate your help. The amazing power of community, posted the question and got a solution in 4 hours
AnkitMehta
1.4K Posts
0
July 18th, 2013 11:00
During my tenure I was agonized thrice with this Storage Unit. Considering Generation gap and never worked with those early Gen array, it was very difficult from Support Perspective but it was fun!
Thank You for your feedback. Such comments do inspire the community to share the knowledge and help the needy!
Appreciate your faith in the community, it makes us stronger!
cincystorage
2 Intern
•
467 Posts
0
July 18th, 2013 18:00
You know what? I have an fc4700 in my basement. Come pick it up if you want it
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2013 21:00
dude call the smithsonian, i am not paying for shipping