This post is more than 5 years old
7 Posts
0
1040
May 17th, 2012 06:00
Clariion CX4-960 - Moving a number of Trespassed LUNs
Hi
I have been given the task of moving a number of Trespassed LUNS (about 50) on Clariion CX4-960.
Would someone answer the following question:
- Can this be completed using Unisphere?
- If this is best method what is the command to move the Storage Processors back to their default location?
- What effect would moving these Storage Processors have on our users and what performance impact could we expect?
Many Thanks
EMC Newbie
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
May 17th, 2012 07:00
while it can be done from Unisphere there is a much better way to do it from the cli
naviseccli -h ss1_spa trespass <>
all
Trespasses all LUNs in the system.
lun lun-number
Trespasses one LUN (specified by lun-number).
mine
Performs whatever trespassing is necessary to take all of the LUNs that have this SP as
a default owner.
kelleg
4.5K Posts
0
May 21st, 2012 13:00
Did the answer provided by Dynamox resolve your issue? If so, please remember to mark the question answered and to award points for a correct answer.
glen
m.stevenson_123
7 Posts
0
May 23rd, 2012 05:00
Hi
I have mark the question as closed but do I reward points to this person?
Thanks
Mick
rupal1
433 Posts
0
May 23rd, 2012 05:00
Just marking it as correct would reward the points to the person who has answered it correctly...here dynamox gets it.:)