Unsolved
This post is more than 5 years old
2 Posts
0
1253
July 25th, 2013 04:00
Clariion CX4-120 DAE expansion
Hi,
I need to perform an expansion of one CX4-120 Clariion Storage system, with two new DAEs (they come without FlareOS).
Cuerrntly customer has:
- 1 CX4-120 base array with additional SPS
- 1 DAE with FlareOS (with 5x450GB)
- 1 DAE without FlareOs (with 5x450GB)
And expansion consists of 2 x DAEs without FlareOs (with 5x450GB)
Well, I'd need some cabling specfications and the procedure that I should follow, can anyone help me with this?
Thanks in advance,
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
July 25th, 2013 04:00
Search support.emc.com for “Clariion Procedure generator”, also for Navishere Service taskbar
kelleg
4.5K Posts
0
July 30th, 2013 11:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
DELL-Sheron G
Moderator
•
228 Posts
0
July 30th, 2013 13:00
As Dynamox said, The CPG will lead u to the right way as far as cabling is concerned, however how will u get FLARE on DAE?
TimH
100 Posts
0
July 30th, 2013 20:00
I believe this has question has been answered correctly. It would be helpful if the poster could mark it as such.
Thank you.
Pablo77
2 Posts
0
July 31st, 2013 01:00
Sorry for the delay to answer, FLARE in DAE is not needed since these new DAEs are just storage (JBOD disks) to add to a current CX120 Clariion, Through the documentation I could get my procedure to do that, Thanks to all!!
kelleg
4.5K Posts
0
August 13th, 2013 12:00
Please mark your question Answered as this helps others searching for a similar issue.
glen