Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

Derhak

7 Posts

2175

December 21st, 2009 07:00

Trouble with EMC Test profile

Hi All:

I am using the following ip address and profile to gain access to the Centera test environment:

"128.221.200.60?v:\\us2_profile3_rdqeDcw.pea"

I check the capability for exist and FPPool_GetCapability returns true.  I then call FPClip_Exist with a valid Clip ID which return true, but when I look at the last error I get -10204: {"FPClip_Exists(): -10204\nFP_OPERATION_NOT_ALLOWED: The use of this operation is restricted or this operation is not allowed because the server capability is false."}

The profile definition has a 'e' in it and I have verified using the FPPool_GetCapability as well.  Does anyone have any thoughts here as to what I am doing incorrectly?

Thanks,

Kevin

Derhak

7 Posts

December 21st, 2009 09:00

Hi Zeeshan:

Thanks for getting back to me.  The version I have is 3.2 p4,=.

Kevin

khanz1

2 Intern

 • 

136 Posts

December 21st, 2009 09:00

Hi Kevin,

I have also verifed that the cluster you are trying to access (128.221.200.60) does indeed have clipExists capability enabled at the server and profile level. Which SDK version are you using?

Derhak

7 Posts

December 21st, 2009 10:00

Hi Zeeshan:

I have figured out my problem, but thanks for your response. I didn't know you could not perform operations on content created using a different pea file. I wrote out a couple of files using the profile that had the attributes I wanted. I was then able to perform the tests that I needed to.

Thanks again for your time,

Kevin

khanz1

2 Intern

 • 

136 Posts

December 21st, 2009 12:00

Great - thanks for updating the thread with your finding. And yes, you will need to use the proper pea file/authentication.

Was this post helpful?

View All

No Events found!

Top