Unsolved
This post is more than 5 years old
165 Posts
0
975
September 2nd, 2009 12:00
Question about pea file
Hi
Let me tell you that i have a Centera G4 Centra start 4.0.2, I have also a G4_mfichas pool, the problem here is that I dont have the .pea file for this pool.
Could you tell me the stepts and commands to create a new .pea file for G4_mfichas?
Best regards
Let me tell you that i have a Centera G4 Centra start 4.0.2, I have also a G4_mfichas pool, the problem here is that I dont have the .pea file for this pool.
Could you tell me the stepts and commands to create a new .pea file for G4_mfichas?
Best regards
No Events found!
EMCDennis
124 Posts
0
September 2nd, 2009 12:00
Create a profile that uses this pool as its home pool. You will be prompted to create a pool entry authorization file (pea file). To create a profile, from Centera Viewer CLI execute "create profile "
If you already have a profile that has this pool as its home pool, then you can create a pea file from this via CLI command "update profile ". Take the defaults when prompted and when asked to save the changes enter "yes" - You will then be prompted to create a pea file.
holgerjakob_c0722c
2 Intern
•
337 Posts
0
September 2nd, 2009 12:00
Bear in mind to follow the online help description on creating a profile in replicated environments and merging .pea files.
Online Help - Centera Configuration - Optional Configuration - Application Access Control -
Best regards, Holger