Unsolved
This post is more than 5 years old
1 Message
0
985
October 19th, 2011 03:00
Publice Centera Cluster Availability
We have been using the IP Addresses '128.221.200.60,128.221.200.61,128.221.200.63' to connect to the Public Centera. However, of late, we have not been able to connect to the same. The error message indicates pool not found. We have the required Port 3218 (tcp/udp) open.
We referred to the link - https://community.emc.com/docs/DOC-1038 and as per the same the above cluster is inactive. However, '128.221.200.59' is accessible but we are not able write to the pool. The error indicates that the pool does have the capacity for new blobs.
The same behavior as above is seen with the Centera provided 'JCenteraVerify' tool as well.
Please advise. Thanks.
No Events found!
Phukon
337 Posts
0
November 24th, 2011 03:00
Are you writing the clips from a Host or replicating between centeras? I would look for exporting/importing the pool and profile settings in the latter case.
Regards,
Phukon
Satish_Kutty
216 Posts
0
November 24th, 2011 04:00
Hi,
Please give us the output of the command given below.
show capacity availability
this would tell us the space available on the cluster.
Regards
Satish.N.Kutty