Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

sbrown1

6 Posts

1490

August 28th, 2008 14:00

Centera Retention by Pool

I would like to know if and/or how a retention value (or retention class) can be set for a specific pool on the Centera. It appears that a default retention period can be specified for the entire cluster, but I've not found way to set this at the pool level.

Any help would be appreciated. Thanks!

khanz1

2 Intern

 • 

136 Posts

September 3rd, 2008 12:00

If you are on a compliance mode Centera, you can update the pool retention on the default pool or any other virtual pool by using the following CLI command on Centera Viewer:

update pool retention

You can also specify min/max retention period at the pool level provided you have the Advanced Retention Management license.

fibrechannel

36 Posts

September 3rd, 2008 22:00

Hi ZZK,

Does it mean that without Advance Retention Management License, we cannot set retention at pool level ?

Thanks

khanz1

2 Intern

 • 

136 Posts

September 4th, 2008 08:00

Hi SAN,

You should be able to set/configure a default retention period at the pool level and do not need Advanced Retention Management (ARM) license for that. Note that the Centera needs to be either in GE or CE+ compliance mode.

ARM license is required if you want to use the Min/Max Governor, Event Based Retention and Litigation Hold features of Centera.

Hope this helps.

Was this post helpful?

View All

No Events found!

Top