Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

srg8bw

12 Posts

820

November 13th, 2008 05:00

Centera CLI hangs when ends the session with the "quit" command

Hello.

I run the Centera CLI in a batch procedure. Since the upgrade to CentraStar 4.0 SP1 I use also the Centera Tools in the newest Version 4.0 but now the Centera CLI hangs if I run a "quit" command inside the batch procedure. I've tested this problem also by open a manual CLI session with the same result.

Versions:
CLI 4.0.1792, 2008-07-17
CentraStar 4.0.1-2711-955-20523

Thanks and regards,
Gerald

GBcentera

46 Posts

November 13th, 2008 06:00

This is a current anomaly with CLI 4.0.1792. This issue has been logged.
Solution emc201373 was created for this issue. When an updated CLI version is available it will be posted on Powerlink. Please check the solution for future updates.

sagle

90 Posts

November 13th, 2008 19:00

I had the same problem, and ended up running the tasks in the background and then sleeping the script to make sure it finished, then finding the pid and killing the process. It is not pretty, but a decent work around until the new CLI is released.

GBcentera

46 Posts

April 15th, 2009 09:00

Primus article (emc201373) has been updated.


Permanent Fix:

This problem is resolved in CV/CLI version 4.0SP2 [4.0.1997]. From Powerlink follow the path: Home > Support > Software Downloads and Licensing > Downloads C > Centera Enterprise Software. In the section titled "Customer CD (Includes CV and CLI)" select the appropriate file named "Customer CD for v4.0.2" image for your OS.

This image will be available by April 22, 2009

Was this post helpful?

View All

No Events found!

Top