Unsolved
This post is more than 5 years old
3 Posts
0
819
April 3rd, 2013 05:00
Windows 8 clients are unable to save the files in a CIFS share with SMB2 enabled
Windows 8 clients are unable to save the files in a CIFS share with SMB2 enabled but they are able to save the files in CIFS shares with SMB1 (SMB2 disabled)
I am able to open the files and edit it but I am not able to save the changes.
The following error is observed while trying to save the files with SMB2 enabled
\\test_cifs\test.txt is currently in use. Try again later
DART version is 7.1.65.8
Does any have idea how to resolve this and I would like to use SMB2 ?
Thanks!
AP
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
April 3rd, 2013 06:00
Does that also happen if you use a mapped drive instead of a UNC path ?
Rainer_EMC
4 Operator
•
8.6K Posts
0
April 3rd, 2013 06:00
Haven seen that
Please open a service request so this can be properly looked
You probably need to take network traces and get them analyzed
Let us know how it was resolved
Rainer
adnanckm
3 Posts
0
April 4th, 2013 22:00
I do not how to see using mapped drive.
Rainer_EMC
4 Operator
•
8.6K Posts
0
April 5th, 2013 04:00
Open your regular file explorer.exe – go do tools -> map network drive and map your share to a drive letter like Z:
Or use “net use” on the Windows CLI
Then try again writing using Z:\... instead of a UNC path like
Server\share\
Server\share\>...
Did you open a service request ?
adnanckm
3 Posts
0
April 5th, 2013 05:00
We have already escalated this !
Thanks for your help
Rainer_EMC
4 Operator
•
8.6K Posts
0
April 5th, 2013 05:00
Please post the SR number if possible