Unsolved
This post is more than 5 years old
26 Posts
0
748
November 7th, 2012 08:00
Usermapper
I have a legacy system that will be powered down soon, The legacy box is configured as the primary usermapper. I am looking for procedure for configuring a secondary usermapper to be the primary.
No Events found!
umichklewis
3 Apprentice
•
1.2K Posts
0
November 7th, 2012 12:00
There's a document in the Celerra document pack, Configuring User Mapping on Celerra. It details the steps to change a usermapper from primary to secondary and back (server_usermapper server_2 -enable primary= ). Let us know if this helps!
umichklewis
3 Apprentice
•
1.2K Posts
0
November 9th, 2012 08:00
One way is to go to the EMC Support site and search for "Configuring Celerra User Mapping". Or, you can go to Powerlink, and select Home > Support > Techincal Documentation and Advisories > Hardware/Platforms Documentation > Celerra Network Server > General Reference.
tocs_1T
26 Posts
0
November 9th, 2012 08:00
Can you clarify where Celerra document pack link is?