Unsolved
This post is more than 5 years old
23 Posts
0
2876
March 26th, 2012 03:00
Slot 2 failed to respond to ping at server_2
I have notice below error .
- Is there any hardware issue?
- what does above Error msg mean?
- please provide us a solution.
In FCP binding table it showing SFP fault..Why?
Sys log error
Mar 26 08:23:17 2012:CS_PLATFORM:BoxMonitor:CRITICAL:43::::1332717797:Slot 2 failed to respond to ping at server_2.
----------------- fcp show ------------------------------
server_2 : commands processed: 1
command(s) succeeded
output is complete
FCP ONLINE HBA 0: S_ID 010010 WWN: 5006016041e0f778 QX4 4G
FCP scsi-0: HBA 0: D_ID 0100ef SP-a00: 500601603ce02ebd Class 3
FCP scsi-16: HBA 0: D_ID 0101ef SP-b00: 500601683ce02ebd Class 3
FCP ONLINE HBA 1: S_ID 020010 WWN: 5006016141e0f778 QX4 4G
FCP scsi-32: HBA 1: D_ID 0201ef SP-b02: 5006016a3ce02ebd Class 3
FCP scsi-48: HBA 1: D_ID 0200ef SP-a02: 500601623ce02ebd Class 3
FCP OFFLINE HBA 2: ALPA 000001 WWN: 5006016241e0f778 QX4 SFP Fault:Rx Power LOW|
FCP scsi-64: HBA 2: CHAINS 64 - 79 OFFLINE
FCP OFFLINE HBA 3: ALPA 000001 WWN: 5006016341e0f778 QX4 SFP Not Present
FCP scsi-80: HBA 3: CHAINS 80 - 95 OFFLINE
1332723430: ADMIN: 6: Command succeeded: fcp show
dynamox
9 Legend
•
20.4K Posts
0
March 26th, 2012 04:00
is this the original SFP that came with Celerra ? If yes, you will need to troubleshoot physical connectivity, SFP in aux port, cable going to the switch, SFP in the switch itself.
dynamox
9 Legend
•
20.4K Posts
0
March 26th, 2012 04:00
is that the auxiliary port ?
ramasingh
23 Posts
0
March 26th, 2012 04:00
yes, why?
dynamox
9 Legend
•
20.4K Posts
0
March 26th, 2012 06:00
swap SFP between aux0 and aux1, see if the error follow the SFP.
ramasingh
23 Posts
0
March 26th, 2012 06:00
But i have not connected any backup device to this aux port.
And even the below Persistent Binding Table is showing N_PORT Bind Pending for HBA2. so why the alert?
=============================================================================
*** Persistent Binding Table ***
Chain 0000: WWN 500601603ce02ebd HBA 0 SP-a00 Bound
Chain 0016: WWN 500601683ce02ebd HBA 0 SP-b00 Bound
Chain 0032: WWN 5006016a3ce02ebd HBA 1 SP-b02 Bound
Chain 0048: WWN 500601623ce02ebd HBA 1 SP-a02 Bound
Chain 0064: WWN 5006048000000000 HBA 2 N_PORT Bind Pending
Chain 0080: WWN 5006048000000000 HBA 3 N_PORT Bind Pending
ramasingh
23 Posts
0
March 26th, 2012 08:00
It's offline. why is this showing SFP Fault:Rx power Low..
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 20:00
could be a faulty SFP, did you try to move it to another aux port ?
ramasingh
23 Posts
0
March 28th, 2012 06:00
Thanks a lot. You came back on this case again.
But in my environment i'm not able to find out HBA2 and HBA3.Why?while it's showing in support material.