Unsolved
This post is more than 5 years old
3 Posts
0
902
October 22nd, 2014 06:00
Procedure or best practice for replace the control station after a failure
Hello, I'm doing a disaster recovery plan for celerra NX4 with one control station, but I can't find the procedure or best practice in the administration of the celerra thet help to recover the control station after a failure and replace the part. I only find in this forum that we execute the NAS_Checkup after change the part, but no more. I apreciate if someone have information about it.
Regards
Francisco Navarro
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
October 22nd, 2014 07:00
hardware issues are handled by EMC/Partner.
frannava73
3 Posts
0
October 22nd, 2014 07:00
Hello. I find this procedure for backup the control station configuration.
SANGUYS: How to Backup the VNX/Celerra Control station
I´m new in administration of Celerra, but maybe you can review this procedure for validate. I´ll try it.
Regards
Jeffey1
4 Operator
•
2.8K Posts
0
October 22nd, 2014 07:00
Hi Navarro,
For replacing the part, you can consult the document generated by EMC SolVe Desktop. For checking error message, you may look for primus article in support.emc.com.
nandas
4 Operator
•
1.5K Posts
0
November 13th, 2014 12:00
Hi Francisco,
Trust you got this resolved by now. However just checking if you still need any help.
Thanks,
Sandip