Unsolved
This post is more than 5 years old
17 Posts
0
391
August 18th, 2015 12:00
Problems connecting NS80 AUX (Tape) to DS300B switch
Hi
Am trying to move NS80 datamover AUX port to ds300B switch from old DS4700 (Mcdata) switch. Have moved the fibre across together with fibre for tape drives and zoned together but server_devconfig cannot see the devices. Green lights on switch, etc, Any ideas as to how I might determine the problem??.
No Events found!
kevlee1
17 Posts
0
August 19th, 2015 00:00
Switch config looks fine, have tried fcp portreset without any luck????????
kevlee1
17 Posts
0
August 19th, 2015 04:00
My error with SAN zone config. Please ignore.
Rainer_EMC
4 Operator
•
8.6K Posts
0
August 19th, 2015 11:00
Layer 8 problem