Unsolved
This post is more than 5 years old
121 Posts
0
1508
October 31st, 2012 05:00
NTP on NS20
How often does NS20 sync the time with the NTP server? How can I manually initiate the sync?
No Events found!
Unsolved
This post is more than 5 years old
121 Posts
0
1508
October 31st, 2012 05:00
How often does NS20 sync the time with the NTP server? How can I manually initiate the sync?
Top
Rainer_EMC
4 Operator
•
8.6K Posts
1
October 31st, 2012 05:00
See server_ntp or server_date
Rainer_EMC
4 Operator
•
8.6K Posts
0
October 31st, 2012 05:00
Yes it is failing – that is what miss means
You can set the date manually with server_date – see man server_date
Avilt1
121 Posts
0
October 31st, 2012 05:00
Does the following output mean that sync is failing?
[nasadmin@EMC-A ~]$ server_date server_2 timesvc update ntp
server_2 : done
[nasadmin@EMC-A ~]$ server_date server_2 timesvc stats ntp
server_2 :
Time synchronization statistics since start:
hits= 0, misses= 0, first poll hit= 0, miss= 366
Last offset: 0 secs, 0 usecs
Current State: Running, disconnected, interval= 60
Time sync hosts:
x.x.119.53, x.x.119.35,
I have manually sync the time using the following command. I am able to ping the NTP servers.
server_date server_2 timesvc update ntp
If it fails, how can I set the time manually? In GUI I could not find the option to set the time?