NS502 Celerra GUI and SSH not available

I did the worst thin I could think of to a Celerra NS502 5.6 system.  I was in the navisphere and was cleaning up my raid groups and blew away the one raif group which contain the OS for the Control Station/Celerra.  Yeah, I know.. why was in Navisphere to begin with...

Of course this system is no longer on support contract.  Luckily I still had the CD for the software and was able to get the system back up seen from navisphere which the raid group was recreated and the software was back on.  Ran several commands to verify software loaded correctly..  The problem I am having is I cannot access the GUI or SSH into the Celerra/Control Station with the IP address on the cge0 interface.  I can ping it and can ping from control station via console.

Any Ideas what i may be missing..  Any help or documentation would be appreciated.

/nas/bin/nas_server -l

id      type  acl  slot groupID  state  name

1        1    0     2              0    server_2

2        4    0     3              0    server_3

*****

/nasmcd/getreason

10 - slot_0 primary control station

5 - slot_2 contacted

5 - slot_3 contacted

I have included two attachments.  Once showing the nas_checkup and the other showing the server_checkup server_2.