Unsolved
This post is more than 5 years old
2 Posts
0
518
November 25th, 2014 02:00
NS-120 upgrade to 6.0.70.4
Hi.
We have an old NS-120 that we recuperated from another site.
We are trying to perform a full install to the DART/FLARE version 6.0.70.4 by using the DVD.
All storage groups, LUNs, etc have been deleted/zeroed from the Cx4-120 before the reinstall was started.
During the upgrade we receive the message "Data Mover 2 Port 0 not logged in backend".
Shortly after this message "Setting up Storage Groups.... Failed." is displayed.
Answering "yes" to the question "Do you want auto-config to retry Storage Group setup?" does not help.
The cabling was checked and double checked and is according to the documentation.
The NS-120 has been powered off and powered on several times.
No fault leds are showing; all is green.
Unfortunately we do not have a support contract any more....
Anybody any ideas on how to solve this "Data Mover 2 Port 0 not logged in backend" error ?
Regards,
K.
Jyothi_P_Bharat
317 Posts
0
November 25th, 2014 06:00
Hi,
Can you please verify the initiators that are still registered with the SPs:
$ /nasmcd/sbin/naviseccli.bin -h -User nasadmin -Password nasadmin -Scope 0 port -list " more.
And please check the output.
Thanks
Jyothi
BDKDV
2 Posts
0
November 26th, 2014 00:00
This command returned no details:
[root@emcnas_i0 /]# /nasmcd/sbin/naviseccli -h 128.221.252.200 -User nasadmin -Password nasadmin -Scope 0 port -list
Information about each SPPORT:
[root@emcnas_i0 /]#