This post is more than 5 years old
265 Posts
0
722
October 27th, 2010 04:00
NS-120 - removing direct connection
hi
I have NS-120 to be installed
DM connect directly to SP FE ports
I wana instead of that
connect ALL SPA/SPB FE ports directly to san switches
and connect DMs to the switches
and do installation as Gateway ( and sure make prober zoning, and masking from cx4-120 to DMs)
putting CD on CS and install DART ..... etc
is that possible ????
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
October 27th, 2010 04:00
Hi,
as far as I know it's not supported to convert a NS Integrated to a gateway - you need to talk to your local EMC or partner technical contact.
Rainer
JGreen
46 Posts
0
November 2nd, 2010 08:00
Rainer is correct.
What you are asking is not supported.
The NS-120 is either an Integrated or Fibre Channel enabled model, but not a gateway.
Mosa3lyan
265 Posts
0
February 14th, 2011 22:00
Thanks