Unsolved
This post is more than 5 years old
12 Posts
0
8456
November 5th, 2014 03:00
NS-120 lost access to shared folders
Hello, installed NS-120 failed disk from the array (Disk 0). We replaced it. but lost access to the shared folder. A shared folder is running, the second stop in a shared folder is not possible.
In the EMC Celerra Manager appeared two warnings:
1. Query Data Movers All. Standby Data Mover server_2.faulted.server_3 is out of service. details ...
Severity: Warning Warning
Brief Description: Standby Data Mover server_2.faulted.server_3 is out of service.
Full Description: No additional information is available.
Recommended Action: No recommended action is available. Use the text from the error message's brief description or the message's ID to search the Knowledgebase on Powerlink. After logging in to Powerlink, go to Support> Knowledgebase Search> Support Solutions Search.
Message ID: 17985568837
2.Query Data Movers server_2.faulted.server_3. Standby Data Mover server_2.faulted.server_3 is out of service. details ...
Severity: Warning Warning
Brief Description: Standby Data Mover server_2.faulted.server_3 is out of service.
Full Description: No additional information is available.
Recommended Action: No recommended action is available. Use the text from the error message's brief description or the message's ID to search the Knowledgebase on Powerlink. After logging in to Powerlink, go to Support> Knowledgebase Search> Support Solutions Search.
Message ID: 17985568837
How to solve this problem?
Vipin VK
2 Intern
•
812 Posts
1
November 5th, 2014 03:00
Open an SSH session to the control station and see the output of /nas/sbin/getreason command. I believe the DM was already in failed over state and the drive replacement caused some interruption to the currently active DM.
Also I would recommend opening an SR in parallel.
mishaman1
12 Posts
0
November 5th, 2014 03:00
If you look at the properties of the shared folder in the EMC Celerra Manager there are two warnings:
1. Query file systems All: All. Failed to get RDE information for file system ID 25. details ..
Severity: Warning Warning
Brief Description: Failed to get RDE information for file system ID 25.
Full Description: Redundant Data Elimination (RDE) information was not returned for the file system indicated. This occurs when the Data Mover, or blade, is not booted up.
Recommended Action: To check the Data Mover, or blade, status use the CLI command / nas / sbin / getreason. All active Data Movers, or blades, should return a reason code of 5 (contacted). If one, or more are missing or reports a different reason code it may need to be powered on or rebooted.
Message ID: 17986158625
2. Query VDMs server_2. Standby Data Mover server_2.faulted.server_3 is out of service. details ...
Severity: Warning Warning
Brief Description: Standby Data Mover server_2.faulted.server_3 is out of service.
Full Description: No additional information is available.
Recommended Action: No recommended action is available. Use the text from the error message's brief description or the message's ID to search the Knowledgebase on Powerlink. After logging in to Powerlink, go to Support> Knowledgebase Search> Support Solutions Search.
Message ID: 17985568837
Vipin VK
2 Intern
•
812 Posts
1
November 5th, 2014 04:00
The slot_2 failed over due to some reason (the support will be able to let you know the root cause). As you are facing issue in accessing the shares and as the DMs are in contacted state, you may try a failback by running
server_standby server_2 -restore mover
But it is recommended to wait for the support to get back to you, if you have an SR open for this.
mishaman1
12 Posts
0
November 5th, 2014 04:00
mishaman1
12 Posts
0
November 5th, 2014 04:00
Do will not prevent implement this command is that we have replaced the drive is still in the status Equalaizing?
Vipin VK
2 Intern
•
812 Posts
0
November 5th, 2014 04:00
Looks like the DMs are in good state. Please share the nas_server -l output also.
From the above error messages, the slot_2 is in failed over state to slot_3 (as error messages read 'Standby Data Mover server_2.faulted.server_3 ') If that is the case, you can try restoring the DM by running server_standby server_2 -restore mover command.
nas_server -l output will make this clear.
mishaman1
12 Posts
0
November 5th, 2014 04:00
[nasadmin@rnpc-cs ~]$ nas_server -l
id type acl slot groupID state name
1 4 0 2 2 server_2.faulted.server_3
2 1 0 3 0 server_2
mishaman1
12 Posts
0
November 5th, 2014 04:00
[nasadmin@rnpc-cs ~]$ /nas/sbin/getreason
10 - slot_0 primary control station
5 - slot_2 contacted
5 - slot_3 contacted
Vipin VK
2 Intern
•
812 Posts
1
November 5th, 2014 05:00
It should not be causing an issue while failing back the DM. But if you can wait for the equalization to complete, will be better.
mishaman1
12 Posts
1
November 5th, 2014 05:00
mishaman1
12 Posts
0
November 5th, 2014 22:00
Run this command, the result of:
[nasadmin @ rnpcmd-cs ~] $ server_standby server_2 -restore mover
server_2:
server_2: going standby
server_2.faulted.server_3: going active
replace in progress ... done
failover activity complete
commit in progress (not interruptible) ... done
server_2: renamed as server_3
server_2.faulted.server_3: renamed as server_2
Warning 17452498966: server_2: One or more file systems failed to mount. Please see the sys_log for details.
If I look at EMC Celerra Manager -> Data Movers-> Server_2-> Files systems-> select our shared folder to access Totoro gone, then there is a warning:
Query file systems All: All. Failed to get RDE information for file system ID 25. details ...
Severity: Warning Warning
Brief Description: Failed to get RDE information for file system ID 25.
Full Description: Redundant Data Elimination (RDE) information was not returned for the file system indicated. This occurs when the Data Mover, or blade, is not booted up.
Recommended Action: To check the Data Mover, or blade, status use the CLI command / nas / sbin / getreason. All active Data Movers, or blades, should return a reason code of 5 (contacted). If one, or more are missing or reports a different reason code it may need to be powered on or rebooted.
Message ID: 17986158625
Runs the command / nas / sbin / getreason:
[nasadmin @ rnpcmd-cs ~] $ / nas / sbin / getreason
10 - slot_0 primary control station
5 - slot_2 contacted
5 - slot_3 contacted
Peter_EMC
674 Posts
0
November 6th, 2014 02:00
What are the error messages when this filesystem is tried been mounted?
Like the "Warning 17452498966: server_2: One or more file systems failed to mount. Please see the sys_log for details." is suggesting?
Which nas version is this?
Please open a support ticket, if this version is still supported.
mishaman1
12 Posts
0
November 6th, 2014 02:00
server_version ALL:
server_2: Product: EMC Celerra File Server Version: T5.6.47.11
server_3: Product: EMC Celerra File Server Version: T5.6.47.11
nas_version: 5.6.47-11
[nasadmin@rnpcmd-cs ~]$ server_log server_2
NAS LOG for slot 2:
--------------------
2014-11-05 03:53:09: ADMIN: 6: Command succeeded: logsys add output disk=root_log_2 bufsz=256
2014-11-05 03:53:09: ADMIN: 6: Command succeeded: logsys add output event bufsz=2048
2014-11-05 03:53:09: BOOT: 6: processor 1 booted and running.
2014-11-05 03:53:10: BOOT: 6: processor 2 booted and running.
2014-11-05 03:53:11: BOOT: 6: processor 3 booted and running.
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: ap boot
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: param config cs_ip=128.221.252.100:128.221.252.101:128.221.253.100:128.221.253.101
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: param kernel autoreboot=600
2014-11-05 03:53:12: KERNEL: 6: 666c8 bufs of size 2000 allocated starting at d4c38000
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: bufcache
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: device isa isa-0
2014-11-05 03:53:12: KERNEL: 6: System Version-T5.6.47.11
2014-11-05 03:53:12: KERNEL: 6: System BIOS Rev Sledgehammer
2014-11-05 03:53:12: STORAGE: 3: find_bios32-> BIOS32 Service Directory found at 000fd460
2014-11-05 03:53:12: KERNEL: 3: pack: 0x00000210, signature: 0x20494350
2014-11-05 03:53:12: KERNEL: 6: PCI BIOS Rev 02.10
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: device pci pci-0
2014-11-05 03:53:12: ADMIN: 6: Command succeeded: dskdumpconfig full slot=2
2014-11-05 03:53:12: DRIVERS: 6: Cached memory - 0x730db bytes @ 0x4ec4004
2014-11-05 03:53:12: DRIVERS: 6: Noncached memory - 0x20b001 bytes @ 0x4f44004 (0x4f44004 phys)
2014-11-05 03:53:12: DRIVERS: 6: QX4 HBA 0 @ 0, irq 18, bus 9, func 0, dev 0
2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] Find Adapter - OSW DB PTR 0x4ec0100
2014-11-05 03:53:12: DRIVERS: 4: 7: Fiber Port 0 SFP inserted: connector type optical
2014-11-05 03:53:12: DRIVERS: 6: optical2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] DVM Initialized
2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] IMQ base ptr = 04f80000; IMQ length = 20000
2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] Signal Address = dfa000e0
2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] Driver Initialization
2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] TPM Notify: st=0xa000000, flg=0x4, cmd=0x1
2014-11-05 03:53:12: DRIVERS: 6: FCDMTL 0 [9.0.0] Set PCI EXP DEV CTRL MRRS to 4096 Bytes
2014-11-05 03:53:13: DRIVERS: 6: FCDMTL 0 [9.0.0] TPM Hndle API Event: cntx=0x4ec3270, evnt=0x4002, info=0x0
2014-11-05 03:53:13: DRIVERS: 6: FCDMTL 0 [9.0.0] TPM Lnk Up: state=0xa000000, flg=0x84
2014-11-05 03:53:13: DRIVERS: 6: FCDMTL 0 [9.0.0] CALLBACK: LINK UP - connection type 2
2014-11-05 03:53:13: DRIVERS: 6: FCDMTL 0 [9.0.0] DVM:PLOGI 5 id=0000ef
2014-11-05 03:53:13: DRIVERS: 6: FCDMTL 0 [9.0.0] DVM:PRLI 6 id=0000ef
2014-11-05 03:53:13: DRIVERS: 6: FCDMTL 0 [9.0.0] Found loop ID 0., via address ID: context 0., pend/login 00000000
2014-11-05 03:53:17: FCP: 6: HBA 0: scan_for_live_port:01 fcLinkUp:512 lupTime:76 devTime:117
2014-11-05 03:53:17: FCP: 6: ONLINE HBA 0: ALPA 000001 WWN: 5006016041e11bbe
2014-11-05 03:53:17: FCP: 6: scsi-0: HBA 0: ALPA 0000ef SP-a00: 5006016044602191
2014-11-05 03:53:17: DRIVERS: 6: Cached memory - 0x730db bytes @ 0x535a004
2014-11-05 03:53:17: DRIVERS: 6: Noncached memory - 0x20b001 bytes @ 0x53da004 (0x53da004 phys)
2014-11-05 03:53:17: DRIVERS: 6: QX4 HBA 1 @ 0, irq 19, bus 9, func 1, dev 0
2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] Find Adapter - OSW DB PTR 0x5356100
2014-11-05 03:53:17: DRIVERS: 4: 7: Fiber Port 1 SFP inserted: connector type optical
2014-11-05 03:53:17: DRIVERS: 6: optical2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] DVM Initialized
2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] IMQ base ptr = 05400000; IMQ length = 20000
2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] Signal Address = dfa020e0
2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] Driver Initialization
2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] TPM Notify: st=0xa000000, flg=0x4, cmd=0x1
2014-11-05 03:53:17: DRIVERS: 6: FCDMTL 1 [9.0.1] Set PCI EXP DEV CTRL MRRS to 4096 Bytes
2014-11-05 03:53:18: DRIVERS: 6: FCDMTL 1 [9.0.1] TPM Hndle API Event: cntx=0x5359270, evnt=0x4002, info=0x0
2014-11-05 03:53:18: DRIVERS: 6: FCDMTL 1 [9.0.1] TPM Lnk Up: state=0xa000000, flg=0x84
2014-11-05 03:53:18: DRIVERS: 6: FCDMTL 1 [9.0.1] CALLBACK: LINK UP - connection type 2
2014-11-05 03:53:18: DRIVERS: 6: FCDMTL 1 [9.0.1] DVM:PLOGI 5 id=0000ef
2014-11-05 03:53:18: DRIVERS: 6: FCDMTL 1 [9.0.1] DVM:PRLI 6 id=0000ef
2014-11-05 03:53:18: DRIVERS: 6: FCDMTL 1 [9.0.1] Found loop ID 0., via address ID: context 0., pend/login 00000000
2014-11-05 03:53:22: FCP: 6: HBA 1: scan_for_live_port:01 fcLinkUp:512 lupTime:77 devTime:117
2014-11-05 03:53:22: FCP: 6: ONLINE HBA 1: ALPA 000001 WWN: 5006016141e11bbe
2014-11-05 03:53:22: FCP: 6: scsi-16: HBA 1: ALPA 0000ef SP-b00: 5006016844602191
2014-11-05 03:53:22: DRIVERS: 6: Cached memory - 0x730db bytes @ 0x57ec004
2014-11-05 03:53:22: DRIVERS: 6: Noncached memory - 0x20b001 bytes @ 0x586c004 (0x586c004 phys)
2014-11-05 03:53:22: DRIVERS: 6: QX4 HBA 2 @ 0, irq 1a, bus 9, func 2, dev 0
2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] Find Adapter - OSW DB PTR 0x57e8100
2014-11-05 03:53:22: DRIVERS: 4: 7: Fiber Port 2 SFP inserted: connector type optical
2014-11-05 03:53:22: DRIVERS: 6: optical2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] DVM Initialized
2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] IMQ base ptr = 058a0000; IMQ length = 20000
2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] Signal Address = dfa040e0
2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] Driver Initialization
2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] TPM Notify: st=0xa000000, flg=0x4, cmd=0x1
2014-11-05 03:53:22: DRIVERS: 6: FCDMTL 2 [9.0.2] Set PCI EXP DEV CTRL MRRS to 4096 Bytes
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] TL status = 3c000006; inbound_resource_status = 0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] FM config = 1010104; FM control = 6; FM status = 330000e0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] PCI reset control = 0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] PCI int pend = 0; PCI int enab = 7; PCI int status = 0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] PCI status reg 10, PCI X status reg 0, DX2 Function status reg 140000
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] TPM Hndle API Event: cntx=0x57eb270, evnt=0x400e, info=0x0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] TPM Lup Failure: st=0xa000000, flg=0x84, info=0x400e
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] DVM DDB Shtdwn, ID: fffffe, Pri/Sec Err: 0, State: 0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] DVM DDB Shtdwn, ID: fffffd, Pri/Sec Err: 0, State: 0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] DVM DDB Shtdwn, ID: fffffc, Pri/Sec Err: 0, State: 0
2014-11-05 03:53:26: DRIVERS: 6: FCDMTL 2 [9.0.2] CALLBACK: type 44004, word0 057e8100, word1 10000001
2014-11-05 03:53:28: DRIVERS: 6: FCDMTL 0 [9.0.0] DVM Disc Comp- Dev List Size: 4
2014-11-05 03:53:28: DRIVERS: 6: FCDMTL 0 [9.0.0] TPM Notify: st=0xa000000, flg=0x208, cmd=0x0
2014-11-05 03:53:32: FCP: 6: HBA 2: scan_for_live_port:00 fcLinkUp:00 lupTime:00 devTime:120
2014-11-05 03:53:32: FCP: 6: OFFLINE HBA 2: ALPA 000001 WWN: 5006016241e11bbe
2014-11-05 03:53:32: FCP: 6: scsi-32: HBA 2: CHAINS 32 - 47 OFFLINE
2014-11-05 03:53:32: DRIVERS: 6: Cached memory - 0x730db bytes @ 0x5c7e004
2014-11-05 03:53:32: DRIVERS: 6: Noncached memory - 0x20b001 bytes @ 0x5cfe004 (0x5cfe004 phys)
2014-11-05 03:53:32: DRIVERS: 6: QX4 HBA 3 @ 0, irq 1b, bus 9, func 3, dev 0
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] Find Adapter - OSW DB PTR 0x5c7a100
2014-11-05 03:53:32: DRIVERS: 4: 11: Fibre Port 3 SFP removed: status 0x0 state 0x0 type 0x0
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] SFP removed : status 0x0 state 0x0 type 0x0
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] SFP port disabled : state 6 type 0
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] DVM Initialized
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] IMQ base ptr = 05d20000; IMQ length = 20000
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] Signal Address = dfa060e0
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] Driver Initialization
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] TPM Notify: st=0xa000000, flg=0x4, cmd=0x1
2014-11-05 03:53:32: DRIVERS: 6: FCDMTL 3 [9.0.3] Set PCI EXP DEV CTRL MRRS to 4096 Bytes
2014-11-05 03:53:33: DRIVERS: 6: FCDMTL 1 [9.0.1] DVM Disc Comp- Dev List Size: 4
2014-11-05 03:53:33: DRIVERS: 6: FCDMTL 1 [9.0.1] TPM Notify: st=0xa000000, flg=0x208, cmd=0x0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] TL status = 3c000007; inbound_resource_status = 0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] FM config = 1010104; FM control = 0; FM status = 370000e0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] PCI reset control = 0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] PCI int pend = 0; PCI int enab = 7; PCI int status = 0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] PCI status reg 10, PCI X status reg 0, DX2 Function status reg 140000
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] TPM Hndle API Event: cntx=0x5c7d270, evnt=0x400e, info=0x0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] TPM Lup Failure: st=0xa000000, flg=0x84, info=0x400e
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] DVM DDB Shtdwn, ID: fffffe, Pri/Sec Err: 0, State: 0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] DVM DDB Shtdwn, ID: fffffd, Pri/Sec Err: 0, State: 0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] DVM DDB Shtdwn, ID: fffffc, Pri/Sec Err: 0, State: 0
2014-11-05 03:53:35: DRIVERS: 6: FCDMTL 3 [9.0.3] CALLBACK: type 44004, word0 05c7a100, word1 10000001
2014-11-05 03:53:41: FCP: 6: HBA 3: scan_for_live_port:00 fcLinkUp:00 lupTime:00 devTime:120
2014-11-05 03:53:41: FCP: 6: OFFLINE HBA 3: ALPA 000001 WWN: 5006016341e11bbe
2014-11-05 03:53:41: FCP: 6: scsi-48: HBA 3: CHAINS 48 - 63 OFFLINE
2014-11-05 03:53:41: DRIVERS: 6: BCM_AllocateMemory: mge0 - Using Low_malloc for shared memory block allocation.
2014-11-05 03:53:41: DRIVERS: 6: mge0: irq=16
2014-11-05 03:53:41: DRIVERS: 6: mge0: Current Mac Address -> 0:60:16:40:6e:eb
2014-11-05 03:53:41: DRIVERS: 6: mge0: Link status - 100 Mbps full duplex
2014-11-05 03:53:41: DRIVERS: 4: 3: mge0: link up
2014-11-05 03:53:41: DRIVERS: 6: BCM_AllocateMemory: mge1 - Using Low_malloc for shared memory block allocation.
2014-11-05 03:53:41: DRIVERS: 6: mge1: irq=18
2014-11-05 03:53:41: DRIVERS: 6: mge1: Current Mac Address -> 0:60:16:40:6e:ea
2014-11-05 03:53:41: DRIVERS: 6: mge1: Link status - 100 Mbps full duplex
2014-11-05 03:53:41: DRIVERS: 4: 3: mge1: link up
2014-11-05 03:53:41: DRIVERS: 6: BCM_AllocateMemory: cge0 - Using Low_malloc for shared memory block allocation.
2014-11-05 03:53:41: DRIVERS: 6: BCM_AllocateMemory: cge0 - Using Low_malloc for jumbo ring allocation.
2014-11-05 03:53:41: DRIVERS: 6: cge0: irq=22
2014-11-05 03:53:41: DRIVERS: 6: cge0: Current Mac Address -> 0:60:16:3e:bd:e2
2014-11-05 03:53:41: DRIVERS: 6: BCM_AllocateMemory: cge1 - Using Low_malloc for shared memory block allocation.
2014-11-05 03:53:41: DRIVERS: 6: BCM_AllocateMemory: cge1 - Using Low_malloc for jumbo ring allocation.
2014-11-05 03:53:42: DRIVERS: 6: cge1: irq=23
2014-11-05 03:53:42: DRIVERS: 6: cge1: Current Mac Address -> 0:60:16:3e:bd:e3
2014-11-05 03:53:42: DRIVERS: 6: BCM_AllocateMemory: cge2 - Using Low_malloc for shared memory block allocation.
2014-11-05 03:53:42: DRIVERS: 6: BCM_AllocateMemory: cge2 - Using Low_malloc for jumbo ring allocation.
2014-11-05 03:53:42: DRIVERS: 6: cge2: irq=20
2014-11-05 03:53:42: DRIVERS: 6: cge2: Current Mac Address -> 0:60:16:3e:b5:a
2014-11-05 03:53:42: DRIVERS: 6: BCM_AllocateMemory: cge3 - Using Low_malloc for shared memory block allocation.
2014-11-05 03:53:42: DRIVERS: 6: BCM_AllocateMemory: cge3 - Using Low_malloc for jumbo ring allocation.
2014-11-05 03:53:42: DRIVERS: 6: cge3: irq=21
2014-11-05 03:53:42: DRIVERS: 6: cge3: Current Mac Address -> 0:60:16:3e:b5:b
2014-11-05 03:53:42: CAM: 6: Scan All Buses
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: pciautoconfig
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: Basic-Volume 0
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk logdsk c0t0l0
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: logdsk
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk logdsk c16t0l0
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume slice root_log_2 817152 8191 logdsk
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: el3config tier2-aui
2014-11-05 03:53:42: IP: 3: Created IPv4 table useHash 0
2014-11-05 03:53:42: IP: 3: Initializing the IPv6 route table
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: ifconfig el30 protocol=IP device=mge0 local=128.221.252.2 netmask=255.255.255.0 broadcast=128.221.252.255 mtu=1500 vlan=0 mac=0:60:16:40:6e:eb
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: ifconfig el31 protocol=IP device=mge1 local=128.221.253.2 netmask=255.255.255.0 broadcast=128.221.253.255 mtu=1500 vlan=0 mac=0:60:16:40:6e:ea
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: hostname server_2.faulted.server_3 selfid=3
2014-11-05 03:53:42: FCP: 3: 4: HBA 2: Link Down.
2014-11-05 03:53:42: FCP: 3: 4: HBA 3: Link Down.
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: file initialize nodes=256000 dnlc=384000
2014-11-05 03:53:42: IP: 6: link ip loop
2014-11-05 03:53:42: IP: 6: route add host 127.0.0.1 127.0.0.1 loop
2014-11-05 03:53:42: IP: 6: link ip6 loop
2014-11-05 03:53:42: IP: 6: route add host ::1 ::1 loop
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: transport start
2014-11-05 03:53:42: IP: 6: Transport timer thread starting ...
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: udp checksum on
2014-11-05 03:53:42: TCP: 6: Initial ephemeral port = 56905
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: tcp
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: rpc
2014-11-05 03:53:42: RCPD: 6: Rcpd service started.
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: rcp
2014-11-05 03:53:42: RCPD: 6: Starting RCP server on 8888
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: logdsk
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk NBS1 c0t0l0
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: NBS1
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk NBS1 c16t0l0
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume hyper SNBS1 1 NBS1
2014-11-05 03:53:42: STORAGE: 6: Addressing absolute location of first 8K on Disk: NBS1
2014-11-05 03:53:42: NBS: 3: BlkSrvConfig::nbsDB init failed path=/.etc/nbsdb/ status=NotFound(7)
2014-11-05 03:53:42: NBS: 3: unable to determine free inodes on /.etc/nbsdb/ (err=StaleHandle)
2014-11-05 03:53:42: NBS: 4: nbsid: AddToDB failed extname=1 vol=NBS1
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: nbs add nbsid=1 vol=NBS1 rw=128.221.252.100:128.221.252.101:128.221.253.100:128.221.253.101 exclusive raw share
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: Basic-Volume 4
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk NBS5 c0t0l4
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: NBS5
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk NBS5 c16t0l4
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume hyper SNBS5 1 NBS5
2014-11-05 03:53:42: STORAGE: 6: Addressing absolute location of first 8K on Disk: NBS5
2014-11-05 03:53:42: NBS: 3: unable to determine free inodes on /.etc/nbsdb/ (err=StaleHandle)
2014-11-05 03:53:42: NBS: 4: nbsid: AddToDB failed extname=5 vol=NBS5
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: nbs add nbsid=5 vol=NBS5 rw=128.221.252.100:128.221.252.101:128.221.253.100:128.221.253.101 exclusive raw share
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: Basic-Volume 5
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk NBS6 c0t0l5
2014-11-05 03:53:42: STORAGE: 6: Allow overlap on: NBS6
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume disk NBS6 c16t0l5
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: volume hyper SNBS6 1 NBS6
2014-11-05 03:53:42: STORAGE: 6: Addressing absolute location of first 8K on Disk: NBS6
2014-11-05 03:53:42: NBS: 3: unable to determine free inodes on /.etc/nbsdb/ (err=StaleHandle)
2014-11-05 03:53:42: NBS: 4: nbsid: AddToDB failed extname=6 vol=NBS6
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: nbs add nbsid=6 vol=NBS6 rw=128.221.252.100:128.221.252.101:128.221.253.100:128.221.253.101 exclusive raw share
2014-11-05 03:53:42: NBS: 3: BlkSrvConfig::nbsDB init failed path=/.etc/nbsdb/ status=NotFound(7)
2014-11-05 03:53:42: NBS: 6: BlkSrv: listening on port 5033
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: nbs start
2014-11-05 03:53:42: ADMIN: 6: Added the following 4 interface(s) to the list of secure MAC clients: 128.221.252.100 128.221.252.101 128.221.253.100 128.221.253.101
2014-11-05 03:53:42: ADMIN: 3: Indication: Could not open the database file
2014-11-05 03:53:42: ADMIN: 3: Indication using sequence starting: 0
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: mac allow=128.221.252.100 128.221.252.101 128.221.253.100 128.221.253.101
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: httpd secmac port=5082
2014-11-05 03:53:42: PERFSTATS: 6: The statmonService started on port: 7777
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: statmonService start port=7777 allow=128.221.252.100 128.221.252.101 128.221.253.100 128.221.253.101
2014-11-05 03:53:42: ADMIN: 6: Command succeeded: logsys delete output console
2014-11-05 03:53:42: BOOT: 3: No processors to boot
2014-11-05 03:53:43: KERNEL: 6: cpu stat started
2014-11-05 03:53:45: DRIVERS: 6: cge0: Link status - 1000 Mbps full duplex
2014-11-05 03:53:45: DRIVERS: 4: 3: cge0: link up
2014-11-05 03:53:45: DRIVERS: 6: cge1: Link status - 1000 Mbps full duplex
2014-11-05 03:53:45: DRIVERS: 4: 3: cge1: link up
2014-11-05 03:53:50: SYSTEM: 6: Setting SIB attention status to 5, contact established
2014-11-05 03:53:50: ADMIN: 6: Command succeeded: sib contacted
2014-11-05 03:55:28: CAM: 6: Scan All Buses
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 32 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 33 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 34 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 35 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 36 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 37 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 38 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 39 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 40 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 41 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 42 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 43 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 44 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 45 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 46 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 47 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 48 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 49 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 50 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 51 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 52 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 53 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 54 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 55 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 56 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 57 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 58 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 59 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 60 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 61 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 62 has failed.
2014-11-05 03:55:29: CAM: 3: 2: Warning: The SCSI HBA 63 has failed.
2014-11-05 06:44:22: CAM: 6: last message repeated 1 times
2014-11-05 10:53:24: CAM: 6: Scan All Buses
2014-11-06 03:36:18: CAM: 6: last message repeated 1 times
2014-11-06 04:04:22: ADMIN: 6: Command succeeded: time timezone= +2
2014-11-06 04:04:22: ADMIN: 6: Command succeeded: param kernel autoreboot=600
2014-11-06 04:04:22: ADMIN: 6: Command succeeded: param config cs_ip=128.221.252.100:128.221.252.101:128.221.253.100:128.221.253.101
2014-11-06 04:04:22: ADMIN: 6: Command succeeded: param config cs_external_ip=192.168.253.120
2014-11-06 04:04:22: DRIVERS: 6: cge2: Shutting down Tigon3
2014-11-06 04:04:23: DRIVERS: 6: cge3: Shutting down Tigon3
2014-11-06 04:04:23: DRIVERS: 6: cge0: Shutting down Tigon3
2014-11-06 04:04:23: DRIVERS: 4: 2: cge0: link down
2014-11-06 04:04:24: DRIVERS: 6: cge1: Shutting down Tigon3
2014-11-06 04:04:24: DRIVERS: 4: 2: cge1: link down
2014-11-06 04:04:24: DRIVERS: 3: dm1: using mac 00:60:16:3e:bd:e2
2014-11-06 04:04:24: DRIVERS: 6: cge1: Shutting down Tigon3
2014-11-06 04:04:25: DRIVERS: 6: cge1: New mac address 00:60:16:3e:ffffffbd:ffffffe2 is now added.
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: hostname server_2 selfid=2
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume disk 1 num_paths=2 c0t0l0 c16t0l0 size=11263 disk_id=1 cel_id=CKM001009002060000
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 11 309248 32768 1
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume disk 2 num_paths=2 c0t0l1 c16t0l1 size=11263 disk_id=2 cel_id=CKM001009002060000
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 74 2097152 20969472 2
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 82 16384 491520 74
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 12 2 11 82
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 39 768000 32768 1
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 40 1 39
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume disk 88 num_paths=2 c16t1l5 c0t1l5 size=2817481 disk_id=10 cel_id=CKM001009002060000
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 89 1 88
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 91 0 3072000000 89
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 92 1 91
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume disk 87 num_paths=2 c16t1l3 c0t1l3 size=2817481 disk_id=9 cel_id=CKM001009002060000
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 93 1 87
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 94 0 204800000 93
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 96 204800000 40960000 93
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 97 1 96
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume hyper 95 2 94 97
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume disk 2 num_paths=2 c0t0l1 c16t0l1 size=11263 disk_id=2 cel_id=CKM001009002060000
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 58 131072 131072 2
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume disk 2 num_paths=2 c0t0l1 c16t0l1 size=11263 disk_id=2 cel_id=CKM001009002060000
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 74 2097152 20969472 2
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: volume slice 81 0 16384 74
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: startPH volume=81
2014-11-06 04:04:25: VRPL: 6: Bad Sector PH registerSelf panicHandler
2014-11-06 04:04:25: STORAGE: 3: Volume:95 affected by bad sector block:12519616 repair state 2
2014-11-06 04:04:25: STORAGE: 3: 13: Clariion Sector Error, Repair Phase-1 Prime: cse_recover server_2 bvid=87 phyblkno=12519616 OR Phase 1: .server_config server_2 "revector start vol=95"
2014-11-06 04:04:25: UFS: 3: fsid 25: un-recoverable media errors for volume 95. log recover skipped
2014-11-06 04:04:25: UFS: 6: Recovering filesystems from log 58
2014-11-06 04:04:25: UFS: 3: Super blocks of all file system in recovery have been read ahead of time.
2014-11-06 04:04:25: UFS: 6: Replay ufs log version 3
2014-11-06 04:04:25: UFS: 3: Super blocks file system not read next time.
2014-11-06 04:04:25: UFS: 3: last message repeated 2 times
2014-11-06 04:04:25: UFS: 6: successful recovery took 65754 Usec
2014-11-06 04:04:25: UFS: 6: processed records 6728 - 6728, 17 reads, 1 writes
2014-11-06 04:04:25: ADMIN: 6: Command succeeded: file recover ufs 58=131072 12=2 40=16 92=23 95=25
2014-11-06 04:04:26: ADMIN: 6: Command succeeded: log sectors=131072 58
2014-11-06 04:04:26: ADMIN: 6: Command succeeded: mount fastmount
2014-11-06 04:04:26: ADMIN: 6: Command succeeded: mount begin
2014-11-06 04:04:26: UFS: 6: Volume name:12
2014-11-06 04:04:26: UFS: 6: I18N is enabled for the system
2014-11-06 04:04:26: UFS: 6: starting gid map file processing for fs:2.
2014-11-06 04:04:26: UFS: 6: gid map file processing is completed for fsid:2 in 16 msec
2014-11-06 04:04:26: UFS: 6: initFS: initialize acl cache on fs 2
2014-11-06 04:04:26: UFS: 6: Filesystem 2 acl file size 49152
2014-11-06 04:04:26: UFS: 6: Filesystem 2 acl firstfree 1
2014-11-06 04:04:26: UFS: 6: end acl slot: 9
2014-11-06 04:04:26: UFS: 6: file system 2 acl initialization done: 5
CSX RT IO: physical memory: none (low) base
2014-11-06 04:04:26: MGFS: 6: CSX initialilize succeeded
2014-11-06 04:04:26: DEDUPE: 6: PE: The Policy Engine has been started with 1 task thread(s) and 1 recall thread(s)
2014-11-06 04:04:26: DBMS: 6: Checkpoint thread starting
2014-11-06 04:04:26: DBMS: 6: Deadlock detection thread starting
2014-11-06 04:04:26: DBMS: 6: last message repeated 2 times
2014-11-06 04:04:26: USRMAP: 6: Starting usermapper service
2014-11-06 04:04:26: USRMAP: 6: 2: Usermapper service has been enabled.
2014-11-06 04:04:26: USRMAP: 6: Database environment resumed
2014-11-06 04:04:26: ADMIN: 6: Command succeeded : serverMount uxfs rw / 12=2 rw
2014-11-06 04:04:26: FTPD: 6: Starting ftpd service
2014-11-06 04:04:26: FTPD: 6: ftpd server started
2014-11-06 04:04:26: UFS: 6: Volume name:40
2014-11-06 04:04:26: UFS: 6: starting gid map file processing for fs:16.
2014-11-06 04:04:26: CIC: 6: DIC_D SSL Client context initialized
2014-11-06 04:04:26: UFS: 6: gid map file processing is completed for fsid:16 in 15 msec
2014-11-06 04:04:26: XLT: 6: line 25: (NULL)::::8859-1.txt: Any thing that didn't match above will be assumed to be latin-1
2014-11-06 04:04:26: ADMIN: 6: Command succeeded : serverMount uxfs ro /.etc_common 40=16 ro
2014-11-06 04:04:26: ADMIN: 6: Command succeeded : serverMount uxfs rw /docs 92=23 rw hwm=90 maxsize=2000000
2014-11-06 04:04:26: UFS: 6: Volume name:92
2014-11-06 04:04:26: ADMIN: 6: Command succeeded : serverMount uxfs rw /common 95=25 rw hwm=90 maxsize=500000 thinprovisioning
2014-11-06 04:04:26: STORAGE: 3: Volume:95 affected by bad sector block:12519616 repair state 2
2014-11-06 04:04:26: STORAGE: 3: 13: Clariion Sector Error, Repair Phase-1 Prime: cse_recover server_2 bvid=87 phyblkno=12519616 OR Phase 1: .server_config server_2 "revector start vol=95"
2014-11-06 04:04:26: UFS: 4: media error affected volume 95, upgradeFSToV2 skipped if it was needed
2014-11-06 04:04:26: UFS: 6: Volume name:95
2014-11-06 04:04:26: STORAGE: 3: Volume:95 affected by bad sector block:12519616 repair state 2
2014-11-06 04:04:26: STORAGE: 3: 13: Clariion Sector Error, Repair Phase-1 Prime: cse_recover server_2 bvid=87 phyblkno=12519616 OR Phase 1: .server_config server_2 "revector start vol=95"
2014-11-06 04:04:26: UFS: 3: initFS failed, initRootNode returned status DirtyFileSystem
2014-11-06 04:04:26: UFS: 4: 48: The file system 25 mount failed during failover because the file system was corrupt.
2014-11-06 04:04:26: UFS: 6: starting gid map file processing for fs:23.
2014-11-06 04:04:26: UFS: 6: gid map file processing is completed for fsid:23 in 144 msec
2014-11-06 04:04:26: UFS: 6: initFS: initialize acl cache on fs 23
2014-11-06 04:04:26: UFS: 6: Filesystem 23 acl file size 49152
2014-11-06 04:04:26: UFS: 6: Filesystem 23 acl firstfree 84
2014-11-06 04:04:26: UFS: 6: end acl slot: 98
2014-11-06 04:04:26: UFS: 6: file system 23 acl initialization done: 94
2014-11-06 04:04:26: UFS: 6: VnodesInPage= 2048 noOfPages= 4
2014-11-06 04:04:26: UFS: 6: last message repeated 1 times
2014-11-06 04:04:26: UFS: 6: FS: /docs, Maximum allow tree quota 8191
2014-11-06 04:04:26: UFS: 6: FS: /docs, Quota limits will be checked on block usage, with block size of 8192 bytes
2014-11-06 04:04:27: UFS: 4: One or more file systems failed to mount. Please see the sys_log for details.
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: mount end
2014-11-06 04:04:27: DRIVERS: 6: cge0: Link status - 1000 Mbps full duplex
2014-11-06 04:04:27: DRIVERS: 4: 5: cge0: link up
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: export "/" anon=0 access=128.221.252.100:128.221.253.100:128.221.252.101:128.221.253.101
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: communityname public
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: syscontact nasadmin
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: syslocation here
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: timesync protocol=ntp action=start host=172.16.204.1
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: dns server=172.16.204.1 server=172.16.204.2 udp domain=rnpcmd.local
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: routed
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: nfs start openfiles=240000 nfsd=256
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: statd
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: lockd
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 param PAX.readWriteBlockSizeInKB is set to 64
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 maximum number of buffers per restore job is 512
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 number of buffers per restore job is 64
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 maximum param PAX.nThread value is 128
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 maximum param PAX.nRestore value is 16
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 maximum param PAX.nPrefetch value is 8
2014-11-06 04:04:27: NDMP: 4: Thread MAC02 maximum param PAX.paxWriteBuff value is 256
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: pax
2014-11-06 04:04:27: NDMP: 3: Thread pax00 BlockBuffer count in PAX Pool: 268
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: rquotad action=start
2014-11-06 04:04:27: NDMP: 6: MaxBufferSize = 131072
2014-11-06 04:04:27: NDMP: 6: Listen thread started
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: ndmp port=10000
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: xattrp
2014-11-06 04:04:27: FTPD: 3: The FTP daemon is already started.
2014-11-06 04:04:27: ADMIN: 3: Command failed: ftpd
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: sysman
2014-11-06 04:04:27: FSTOOLS: 6: System management component initializing...
2014-11-06 04:04:27: FSTOOLS: 6: E003 - evd (V1.10) initialization complete
2014-11-06 04:04:27: FSTOOLS: 6: M004 - snmp_pe (V1.10) initialization complete
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: kerbinit
2014-11-06 04:04:27: LGDB: 6: Database started
2014-11-06 04:04:27: SMB: 6: CIFS Server FILESERVER[] created (0)
2014-11-06 04:04:27: SMB: 6: Full computer name fileserver.rnpcmd.local, Realm RNPCMD.LOCAL
2014-11-06 04:04:27: ADMIN: 6: Command succeeded: cifs add compname=FILESERVER domain=RNPCMD.LOCAL netbios=FILESERVER interface=cifs
2014-11-06 04:04:27: SMB: 6: Threads number not specified and memory=4095 Mbytes, use 256 threads
2014-11-06 04:04:28: SMB: 6: Registry initialization OK
2014-11-06 04:04:28: SMB: 6: Create SMB threads type 0
2014-11-06 04:04:28: SMB: 6: Create SMB threads type 2
2014-11-06 04:04:28: SMB: 6: Start SMB threads type 0
2014-11-06 04:04:28: SMB: 6: Start SMB threads type 2
2014-11-06 04:04:28: SMB: 6: Start VDM configuration
2014-11-06 04:04:28: SMB: 6: ShareDB: DART database started
2014-11-06 04:04:28: SECMAP: 6: server_2 database started
2014-11-06 04:04:28: SMB: 6: End VDM configuration
2014-11-06 04:04:28: ADMIN: 6: Command succeeded: cifs start
2014-11-06 04:04:28: ADMIN: 6: Command succeeded: vdm begin
2014-11-06 04:04:28: DPSVC: 6: DpService::RecoveryReplicationVdmState() begin
2014-11-06 04:04:28: DPSVC: 6: DpService::RecoveryReplicationVdmState() end
2014-11-06 04:04:28: ADMIN: 6: Command succeeded: vdm end
2014-11-06 04:04:28: ADMIN: 6: Command succeeded: dpinit
2014-11-06 04:04:28: DPSVC: 6: BDatabase:: InitDatabase
2014-11-06 04:04:28: DPSVC: 6: BDatabase::initialize getEnvironment
2014-11-06 04:04:28: DPSVC: 6: BDatabase::initialize Register
2014-11-06 04:04:28: DPSVC: 6: BDatabase::initialize getDatabase
2014-11-06 04:04:28: DPSVC: 6: DpThrot::queryRemSystem 'CKM001009002060000' not found
2014-11-06 04:04:28: DPSVC: 3: loopback:20001:CKM001009002060000:1:1:127.0.0.1:127.0.0.1
2014-11-06 04:04:28: DPSVC: 3: ControlStation:20002:CKM001009002060000:2:4:128.221.252.2:128.221.252.100
2014-11-06 04:04:28: DPSVC: 6: DpInit::versionInit() Recover Done
2014-11-06 04:04:28: DPSVC: 6: DpInit::policyInit() Recover Done
2014-11-06 04:04:28: DPSVC: 6: DpInit::replicaInit() Recover Done
2014-11-06 04:04:28: DPSVC: 6: DpInit::sessionInit() Recover Done
2014-11-06 04:04:28: DPSVC: 6: DpInit::snapSchedulerInit() Done
2014-11-06 04:04:28: DPSVC: 6: DpInit::taskManagerInit() Done
2014-11-06 04:04:28: CMD: 3: DicXmlAsyncService::initDicXmlShortMsgService()
2014-11-06 04:04:28: CMD: 3: DicXmlAsyncService::initDicXmlLongMsgService()
2014-11-06 04:04:28: CMD: 3: DicXmlAsyncService::initDicXmlDefMsgService()
2014-11-06 04:04:28: CMD: 3: DicXmlAsyncService::initDicXmlDartMsgService()
2014-11-06 04:04:28: CMD: 6: Cmd timer thread starting ...
2014-11-06 04:04:28: CMD: 6: Initializing Indication Threads
2014-11-06 04:04:28: CMD: 6: CmdRecover:: Initdatabase Starting
2014-11-06 04:04:28: CMD: 6: CmdDatabase:: InitDatabase
2014-11-06 04:04:28: CMD: 6: CmdDatabase::initialize getEnvironment
2014-11-06 04:04:28: CMD: 6: CmdDatabase::initialize Register
2014-11-06 04:04:28: DPSVC: 6: BDatabase:: InitDatabase
2014-11-06 04:04:28: DPSVC: 6: BDatabase::initialize getEnvironment
2014-11-06 04:04:28: DPSVC: 6: BDatabase::initialize Register
2014-11-06 04:04:28: DPSVC: 6: BDatabase::initialize getDatabase
2014-11-06 04:04:28: CMD: 6: CMD Context: Recovering the Cmd Contexts :
2014-11-06 04:04:28: CMD: 6: Task_Id RefCount
2014-11-06 04:04:28: CMD: 3: TaskRecovery::destroy() Object not instantiated.
2014-11-06 04:04:28: CMD: 6: CmdRecover:Recovery Completed.
2014-11-06 04:04:28: DPSVC: 3: DpInit:Recovery Completed.
2014-11-06 04:04:28: DRIVERS: 6: cge1: Link status - 1000 Mbps full duplex
2014-11-06 04:04:28: DRIVERS: 4: 5: cge1: link up
2014-11-06 04:04:29: DRIVERS: 3: LACP dm1: link up cge0 reason:"From Attached to Collecting:Partner is in sync and it is selected."
2014-11-06 04:04:29: DRIVERS: 4: 3: dm1: link up LACP
2014-11-06 04:04:30: TIMESYNC: 3: NTP Server Select: No error reported
2014-11-06 04:04:30: TIMESYNC: 3: Didn't connect to timeserver on initial try
2014-11-06 04:04:31: DRIVERS: 3: LACP dm1: link up cge1 reason:"From Attached to Collecting:Partner is in sync and it is selected."
2014-11-06 04:04:33: SMB: 6: >DC=RNPCMD-BDC(172.16.204.2) R=10 T=0 ms S=0,0x1/-1
2014-11-06 04:04:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:04:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:04:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:04:33: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:04:33: SMB: 4: Unable to connect to Active Directory server rnpcmd-bdc.rnpcmd.local (172.16.204.2), port 389
2014-11-06 04:04:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:04:33: SMB: 3: KC_GetCreds:gss_acquire_cred_ext failed; majStatus=0xd0000, min=-1765328347
2014-11-06 04:04:33: SMB: 3: DC_GetBlob RNPCMD.LOCAL\fileserver RNPCMD-BDC\HOST=Miscellaneous failure. Clock skew too great.
2014-11-06 04:04:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:04:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:04:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:04:33: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:04:33: SMB: 4: Unable to connect to Active Directory server rnpcmd-bdc.rnpcmd.local (172.16.204.2), port 389
2014-11-06 04:04:33: SMB: 6: >DC=RNPCMD-PDC(172.16.204.1) R=4 T=0 ms S=0,0x1/-1
2014-11-06 04:04:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.1 returned error: Clock skew too great (37)
2014-11-06 04:04:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:04:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:04:33: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:04:33: SMB: 4: Unable to connect to Active Directory server rnpcmd-pdc.rnpcmd.local (172.16.204.1), port 389
2014-11-06 04:04:33: SMB: 6: GPO update failed for server fileserver
2014-11-06 04:04:33: LGDB: 6: Restricted Groups enforced for fileserver
2014-11-06 04:04:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.1 returned error: Clock skew too great (37)
2014-11-06 04:04:33: LIB: 3: DNS update ERROR: No computer account in the Realm while registering fileserver.rnpcmd.local
2014-11-06 04:04:53: SMB: 6: DC0xe068c404: setDCDown DC, refresh if needed (origin=rpc)
2014-11-06 04:04:53: SMB: 3: DC0xe068c40c RNPCMD-PDC[RNPCMD] 172.16.204.1 dispatchIPCtoDC: No Reply TID=0x0 PID=0x1001 UID=0x0
2014-11-06 04:04:53: SMB: 3: SSXNego:Negociate NoReply
2014-11-06 04:04:53: SMB: 3: Open&Bind(lsarpc): No reply from DC=RNPCMD-BDC DCStatus=0/WAIT Ems=Bind_CreateXFailed
2014-11-06 04:04:53: SMB: 3: OpenAndBind[LSA] DC=RNPCMD-BDC failed: Bind_CreateXFailed WAIT
2014-11-06 04:04:53: SMB: 6: sendLookupSIDs pipe lsarpc reopened
2014-11-06 04:04:53: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 04:04:53: SMB: 3: lookupSIDs:no reply
2014-11-06 04:04:53: SMB: 3: sendFirstDCQuery: NoAdminName domain=RNPCMD status=DOMAIN_CONTROLLER_NOT_FOUND
2014-11-06 04:04:53: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:04:53: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:04:53: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:04:53: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:04:53: SMB: 4: Unable to connect to Active Directory server rnpcmd-bdc.rnpcmd.local (172.16.204.2), port 389
2014-11-06 04:04:53: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:04:53: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:04:53: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:04:53: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:04:53: SMB: 4: Unable to connect to Active Directory server rnpcmd-bdc.rnpcmd.local (172.16.204.2), port 389
2014-11-06 04:04:53: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.1 returned error: Clock skew too great (37)
2014-11-06 04:04:53: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:04:53: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:04:53: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:04:53: SMB: 4: Unable to connect to Active Directory server rnpcmd-pdc.rnpcmd.local (172.16.204.1), port 389
2014-11-06 04:04:53: SMB: 6: GPO update failed for server fileserver
2014-11-06 04:05:16: DEDUPE: 6: Domain initialized for fsid 23
2014-11-06 04:05:21: SMB: 3: W2KgetInitialDC:favorite DC=RNPCMD-PDC IP=172.16.204.1/172.16.204.1 not active for domain=rnpcmd.local
2014-11-06 04:05:22: SMB: 3: {common} Cannot get .etc dir (51=Frozen)
2014-11-06 04:05:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:05:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:05:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:05:33: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:05:33: SMB: 4: Unable to connect to Active Directory server rnpcmd-bdc.rnpcmd.local (172.16.204.2), port 389
2014-11-06 04:05:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.2 returned error: Clock skew too great (37)
2014-11-06 04:05:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:05:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:05:33: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:05:33: SMB: 4: Unable to connect to Active Directory server rnpcmd-bdc.rnpcmd.local (172.16.204.2), port 389
2014-11-06 04:05:33: KERBEROS: 5: Warning: send_as_request: Realm RNPCMD.LOCAL - KDC 172.16.204.1 returned error: Clock skew too great (37)
2014-11-06 04:05:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API major error: Miscellaneous failure
2014-11-06 04:05:33: LDAP: 3: LDAP authentication: Unable to acquire credentials for principal: FILESERVER$@RNPCMD.LOCAL. - GSS-API minor error: Clock skew too great
2014-11-06 04:05:33: LDAP: 3: LdapClient::connect: error message: Sasl protocol violation, (error code 99)
2014-11-06 04:05:33: SMB: 4: Unable to connect to Active Directory server rnpcmd-pdc.rnpcmd.local (172.16.204.1), port 389
2014-11-06 04:05:33: SMB: 6: GPO update failed for server fileserver
2014-11-06 04:06:30: TIMESYNC: 3: Connect to timeserver
2014-11-06 04:30:47: KERNEL: 6: Time set
2014-11-06 04:31:03: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 04:31:08: LDAP: 3: Ldap bind: LDAP server is down
2014-11-06 04:31:08: LDAP: 3: LdapClient::connect: ldap server 172.16.204.1: error message: Server down, (error code 81)
2014-11-06 04:31:08: SMB: 4: Unable to connect to Active Directory server rnpcmd-pdc.rnpcmd.local (172.16.204.1), port 389
2014-11-06 04:31:58: NFS: 6: Processed options:
2014-11-06 04:31:58: NFS: 6: Export / @ e74ae804, rootuid 0
2014-11-06 04:32:41: CAM: 6: Scan All Buses
2014-11-06 04:32:42: ADMIN: 6: xml_dns domaincount :1
2014-11-06 04:51:55: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 05:18:03: LIB: 3: last message repeated 1 times
2014-11-06 05:34:03: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 05:36:07: CFS: 3: quota operations not permitted on root fs
2014-11-06 05:36:07: ADMIN: 3: Command failed: file quota /common config report=/common/.etc/config_file
2014-11-06 05:36:07: CFS: 3: quota operations not permitted on root fs
2014-11-06 05:36:07: ADMIN: 3: Command failed: file quota /common config report=/common/.etc/config_file
2014-11-06 05:48:55: SMB: 6: Abort /unmount received unable to open file: \common.
2014-11-06 05:53:55: SMB: 6: last message repeated 54 times
2014-11-06 05:54:55: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 06:01:35: LDAP: 3: Ldap bind: LDAP server is down
2014-11-06 06:01:35: LDAP: 3: LdapClient::connect: ldap server 172.16.204.1: error message: Server down, (error code 81)
2014-11-06 06:01:35: SMB: 4: Unable to connect to Active Directory server rnpcmd-pdc.rnpcmd.local (172.16.204.1), port 389
2014-11-06 06:08:04: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:08:04: SMB: 3: lookupNames:no reply
2014-11-06 06:08:04: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:08:04: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:06: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:06: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:19: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:19: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:20: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:20: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:20: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:20: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:20: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:20: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:20: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:20: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:20: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:20: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:24: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:24: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:24: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:24: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:24: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:24: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:24: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:24: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:41: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:41: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:41: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:41: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:41: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:41: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:41: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:41: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:46: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:46: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:46: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:46: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:46: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:46: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:46: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:46: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:46: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:46: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:46: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:46: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:59: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:59: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:59: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:59: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:59: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:59: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:59: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:59: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:59: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:59: SMB: 3: lookupSIDs:no reply
2014-11-06 06:09:59: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:09:59: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:04: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:04: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:04: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:04: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:04: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:04: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:04: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:04: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:16: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:16: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:16: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:16: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:16: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:16: SMB: 3: lookupSIDs:no reply
2014-11-06 06:10:16: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:10:16: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:03: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:03: SMB: 3: lookupNames:no reply
2014-11-06 06:11:03: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:03: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupNames:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:12: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:12: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:45: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:45: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:11:58: SMB: 3: LsarOpenPolicy2::Request failed=0xc0000022
2014-11-06 06:11:58: SMB: 3: lookupSIDs:no reply
2014-11-06 06:12:41: ADMIN: 6: Command succeeded: time timezone= +3
2014-11-06 06:15:31: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:15:31: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:15:31: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:15:31: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:15:31: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:15:31: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:15:31: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:15:31: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:15:32: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:15:32: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:15:47: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 06:16:04: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:04: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:04: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:04: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:07: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:07: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:07: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:07: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:07: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:07: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:07: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:07: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:08: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:08: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:41: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:41: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:16:41: VC: 3: Invalid access from client 172.16.204.17 to CHECK$
2014-11-06 06:16:41: VC: 3: Client 172.16.204.17 (172.16.204.17) is not a VC/CEPP server
2014-11-06 06:35:47: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 07:00:47: LIB: 3: last message repeated 1 times
2014-11-06 07:13:03: CFS: 3: quota operations not permitted on root fs
2014-11-06 07:13:03: ADMIN: 3: Command failed: file quota /common config report=/common/.etc/config_file
2014-11-06 07:13:03: CFS: 3: quota operations not permitted on root fs
2014-11-06 07:13:03: ADMIN: 3: Command failed: file quota /common config report=/common/.etc/config_file
2014-11-06 07:15:55: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 07:31:58: LDAP: 3: Ldap bind: LDAP server is down
2014-11-06 07:31:58: LDAP: 3: LdapClient::connect: ldap server 172.16.204.1: error message: Server down, (error code 81)
2014-11-06 07:31:58: SMB: 4: Unable to connect to Active Directory server rnpcmd-pdc.rnpcmd.local (172.16.204.1), port 389
2014-11-06 07:37:03: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 07:53:47: CFS: 3: quota operations not permitted on root fs
2014-11-06 07:53:47: ADMIN: 3: Command failed: file quota /common config report=/common/.etc/config_file
2014-11-06 07:53:47: CFS: 3: quota operations not permitted on root fs
2014-11-06 07:53:47: ADMIN: 3: Command failed: file quota /common config report=/common/.etc/config_file
2014-11-06 07:54:38: ADMIN: 6: Command succeeded: file quota /docs config report=/docs/.etc/config_file
2014-11-06 07:57:55: ADMIN: 6: last message repeated 1 times
2014-11-06 07:57:55: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
2014-11-06 08:24:03: LIB: 3: last message repeated 1 times
2014-11-06 08:39:55: LIB: 3: DNS update ERROR: Operation refused for policy or security reasons while registering fileserver.rnpcmd.local
Peter_EMC
674 Posts
0
November 6th, 2014 04:00
the problem of the mount is this:
2014-11-06 04:04:26: STORAGE: 3: Volume:95 affected by bad sector block:12519616 repair state 2
2014-11-06 04:04:26: STORAGE: 3: 13: Clariion Sector Error, Repair Phase-1 Prime: cse_recover server_2 bvid=87 phyblkno=12519616 OR Phase 1: .server_config server_2 "revector start vol=95"
2014-11-06 04:04:26: UFS: 4: media error affected volume 95, upgradeFSToV2 skipped if it was needed
2014-11-06 04:04:26: UFS: 6: Volume name:95
2014-11-06 04:04:26: STORAGE: 3: Volume:95 affected by bad sector block:12519616 repair state 2
2014-11-06 04:04:26: STORAGE: 3: 13: Clariion Sector Error, Repair Phase-1 Prime: cse_recover server_2 bvid=87 phyblkno=12519616 OR Phase 1: .server_config server_2 "revector start vol=95"
2014-11-06 04:04:26: UFS: 3: initFS failed, initRootNode returned status DirtyFileSystem
and because of this the mount of the FS is failing.
Try to open a support ticket
mishaman1
12 Posts
0
November 6th, 2014 04:00
How can I view / copy the information from this shared folder to which there is no access to personal computers? In the EMC Celerra manager -> DM -> server_2 -> File systems shows that 117GB in this folder