Unsolved
This post is more than 5 years old
13 Posts
0
640
January 8th, 2013 02:00
Need to move HDD's in celerra
Hi All,
Can you anyone advice me on how to swap drive locations in Celerra NS480-AUX.
Vignesh
No Events found!
Unsolved
This post is more than 5 years old
13 Posts
0
640
January 8th, 2013 02:00
Hi All,
Can you anyone advice me on how to swap drive locations in Celerra NS480-AUX.
Vignesh
Top
dynamox
9 Legend
•
20.4K Posts
0
January 8th, 2013 05:00
why ? Is the system in use ?
vigneshkadirvel
13 Posts
0
January 8th, 2013 06:00
Dynamox,
i am new to celerra array, i had received a new ticket in that they have mentioned "Swap Drive Locations NS480", i cant understand, even i googled my query but still i didn't get the answer.
vigneshkadirvel
13 Posts
0
January 8th, 2013 06:00
Yeah dynamox, kindly share your knowledge on this part.
dynamox
9 Legend
•
20.4K Posts
0
January 8th, 2013 06:00
you need to find out what the customer is trying to do and why ?
dynamox
9 Legend
•
20.4K Posts
0
January 8th, 2013 06:00
you did not answer my questions
vigneshkadirvel
13 Posts
0
January 8th, 2013 23:00
sorry dynamox, i don't have a privilege to question at my customer. I jus wanted to know the procedure for my sake.
dynamox
9 Legend
•
20.4K Posts
0
January 9th, 2013 04:00
pull on the blue latch to remove the drive, which drive you pull and where you place it will determine if you remain employed at your company.
vigneshkadirvel
13 Posts
0
January 9th, 2013 06:00
i seen the picture which you have shared.. is there anythingelse to perform in configuration side???
dynamox
9 Legend
•
20.4K Posts
0
January 9th, 2013 06:00
you don't have any details what customer is trying to do so i can't tell you if there is anything else that needs to be done.