Unsolved
This post is more than 5 years old
2 Intern
•
258 Posts
0
935
May 3rd, 2012 12:00
NAS DB LUN issues
Hello,
We deleted couple of lun's in clariion before deleting them in Celerra NS -120 model.Please see below for the lun #'s. Can any one help me in deleting those disks and edit nasdb to scan the storage on celerra. We have a clariion CX-3 attached to celerra.
14 y 1056546 APM00081100242-005D CLATA d14 1,2 (Lun 93)
18 y 1056546 APM00081100242-0053 CLATA d18 1,2 (Lun 83)
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
May 3rd, 2012 12:00
code upgrade will not fix it, it may actually fail the pre-upgrade script. There are entries in a couple of special files that contain information about file systems, volumes, slices etc. You need to have EMC do it or you might cause some serious issues.
dynamox
9 Legend
•
20.4K Posts
0
May 3rd, 2012 12:00
open an SR for this
dynamox
9 Legend
•
20.4K Posts
0
May 3rd, 2012 12:00
i wish i could help you but EMC support is your best route here.
bonnu06
2 Intern
•
258 Posts
0
May 3rd, 2012 12:00
Its not a production box so.. we can play around with it to fix it. If there is no go other thatn with EMC then i guess i have to follow it.
bonnu06
2 Intern
•
258 Posts
0
May 3rd, 2012 12:00
Hello Dynamox, thanks for replying.
I did open an SR for this but its an billable charge for us. So i want to fix it myself. Does the code upgrade fix this issue ?
bonnu06
2 Intern
•
258 Posts
0
May 3rd, 2012 13:00
Thanks Dynamox. I appreciate it.
BillStein-Dell
Moderator
•
285 Posts
0
May 3rd, 2012 14:00
If it's not a production box, can't you do a fresh install? That will solve the issue.
[EDIT] You may be able to get your local CS team to assist you with a fresh install as part of "putting the box in production". Only the NS-20 and the NX-4 were certified for customer installation, if memory serves. Someone correct me if I'm remembering that wrong.
Message was edited by: William Stein
bonnu06
2 Intern
•
258 Posts
0
May 4th, 2012 07:00
I can do a fresh install but i need to zero out the clariion lun's i mean the root disks of the celerra. If someone can get me the steps on that. I can fix it myself.